Cemented Carbide Tungsten Products Carbide Tools For Cutting / Mining / Wear Parts
Tungsten carbide is widely used in industry because of its extraordinary properties. Because of its wear resistance and hardness (9.8 Moe's scale), tungsten carbide is ideally suited for wear parts, other machine parts and dies which are subject to severe service conditions, such as high temperatures, corrosion and abrasion.. In recent years, tungsten carbide has emerged as a superior alternative to steel in many industrial applications.
A large portion of the tungsten volume in cemented carbide is today used in wear part applications, where there is a wide range of products from the very small (such as balls for ball-point pens) to large and heavy products, such as punches, dies or hot rolls for rolling mills in the steel industry.
Applications of Cemented Carbide Tungsten Products:
Wear Parts ( Mechanical seal ring, carbide bush/sleeve, carbide ball, etc)
Oil & Gas ( Carbide ball, valve ball and seat,carbide nozzle,downhole tool parts,etc)
Cutting Tools ( Carbide burs, burs BLANKS, woodworking inserts, carbide round cutters,planer knife tips)
Tungsten Carbide Wire Drawing Dies
Carbide Mining bits and Button Bits
Hard Facing Material-Cemented Carbide Pellets
Advantages of Carbide Tungsten Products:
1.100% Made from virgin material
2. Free samples available
3. Efficient machining, good high-temperature stability
4. Smooth surface with nice coating
5. Easy to assembly, no crack or chipping
6. Various grade and size are available
Cemented Carbide Material Grades:
|
Grade/ Properties / Application |
||||||
|
Grade |
Equal to ISO Category Number |
Performance |
Performance&application recommended |
|
||
|
Density |
Bend Strength |
Hardness |
|
|||
|
G/Cm 3 |
N/mm 2 |
HRA |
|
|||
|
YG3 |
K01 |
14.9-15.3 |
≥1180 |
≥90.5 |
Sand-blasting nozzles qualified for fine turning and half-fine turning when cast iron, non-ferrous metal, alloys as well as non-alloy materials cutting consecutively. Can make wire drawing of steel and non-ferrous metal. Also qualified for sand-blasting n |
|
|
YG3X |
K01 |
15.1-15.4 |
≥1300 |
≥91.5 |
|
|
|
YK05 |
|
14.95 |
2500 |
90.5 |
Mostly used as the buttons of small and bits medium sized percussion |
|
|
YG8C |
|
14.8 |
2400 |
88.5 |
and as the inserts of rotary prospecting bits to cut soft and |
|
|
medium hard formations. |
|
|||||
|
YG6 |
|
14.95 |
1900 |
90.5 |
For coring crowns,electric coal drill bits, coal cutting picks,oil |
|
|
cone bits and scraping knife bits,used in coal geological prospecting, |
|
|||||
|
mining and oil well boring. |
|
|||||
|
YG6X |
K10 |
14.8-15.1 |
≥1560 |
≥91.0 |
Qualified for machining of chilled cast iron, alloy cast iron, refractory steel and alloy steel. Also Qualified for the machining of common cast iron. |
|
|
YG6A |
K10 |
14.7-15.1 |
≥1580 |
≥91.0 |
|
|
|
YG6 |
K20 |
14.7-15.1 |
≥1670 |
≥89.5 |
Qualified for finish machining and semi-finish machining for the cast iron, non-ferrous metal, alloy and unalloyed materials. Also qualified for wire drawing for the steel and non-ferrous metal, electric drill for geology use and steel drill etc. |
|
|
YG8 |
K30 |
14.6-14.9 |
≥1840 |
≥89 |
Qualified for rough machining of cast iron, non-ferrous metal, nonmetal materials, drawing of steel, non-ferrous metal and pipes, various drills for geology use, tools for machine manufacture and wearing parts. |
|
|
YG10X |
|
14.5 |
2400 |
91.5 |
Fine grain alloy, good wear resistance,Used for processing hard |
|
|
wood, veneer board,PCB,PVC and metals. |
|
|||||
|
YG11 |
|
14.4 |
2600 |
88.5 |
Forming or stamping dies for metal powders and nonmental powders. |
|
|
YG11C |
K40 |
14.4 |
2700 |
86.5 |
Largely for the inserts and buttons of percussion bits and tricone bits to cut medium |
|
|
hard, hard and very hard formations. |
|
|||||
|
YG15 |
K40 |
14 |
2800 |
87.5 |
For fabricating drawing dies of steel tubesand rods under high |
|
|
compressibility ratio;punching,stamping,forging tools under large stress. |
|
|||||
|
YG15C |
|
14 | ||||
