active 10 inch outdoor power line array system
W-110&W-110P is a line array system which is made of one 10" neodymium woofers, one 2.5" titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. Wherever low frequency extension is required, a W-110&W-110P will integrate seamlessly with W-118 or W-118P line array sub-bass system in a standard configuration. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-110&W-110P is very versatile and scalable for a wide range of applications in touring performance, corporate and fixed installation fields.
W-118/W-118P is dedicated high performance sub-bass system designed to augment the low frequency output of the W-110, W-118/W-118P is a sub-bass enclosure which must be flown with W-110&W-110P. Its physical dimensions are identical to the W-110&W-110P and it is equipped with the same proprietary rigging system. It features with a 18" neodymium woofers with magnet structure and suspensions engineered for maximum linear excursion. The W-118P with Bluetooth features a highly efficient power amp module and incorporated DSP.
Model | W-110 & W-118/W-110P & W-118P(Active) |
Type | Line array system |
line array sub-bass system(W-118/W-118P) | |
Frequency Response | 65Hz-20KHz±3dB |
35Hz-500Hz±3dB(W-118/W-118P) | |
Power handling | LF 350W(RMS)700W(PEAK) |
HF 90W(RMS)180W(PEAK) | |
600W(RMS)1200W(PEAK) | |
Power amp | 600W/8ohm (W-110P) / 900W/8ohm (W-118P) |
Amplifier type | Switching power amp, class D circuit |
Other functions | built-in crossover(W-110P) |
Sensitivity | LF 96dB(1W1M) |
HF 108dB(1W1M) | |
109dB(1W1M)(W-118/W-118P) | |
MaxS.P.L | LF 122dB(PEAK/1M) |
HF 125dB(PEAK/1M) | |
135dB(PEAK/1M)(W-118/W-118P) | |
LF section | 1×10"(260mm) neodymium woofer |
75mm(3in)coil | |
1×18"(460mm)woofer | |
100mm(4in)coil (W-118/W-118P) | |
Nominal impedance | 16 ohm |
8 ohm (W-118/W-118P) | |
HF section | 1x2.5"compression driver with44mm |
titanium diaphragm | |
Nominal impedance | 16 ohm |
Output section | 2-channel |
Dispersion pattern | 110º H×9º V |
Surface finish | Black paint |
Array design | Arrays of less than 3×W-110 will |
provide poor dispersion control and are | |
neither recommended nor supported | |
Speaker cables | LF1(+)1(-) HF 2(+)2(-) |
1(+)1(-) (W-118/W-118P) | |
Rigging system | Please refer to the W-110 user's |
manual before any operation | |
Input connectors | 2×NL4MP speakon |
Recommend crossover | LF 70Hz-2KHz |
HF 2KHz-20KHz | |
35Hz-120Hz(W-118/W-118P) | |
Dimensions | 546×291×410mm(W×H×D) |
546×510×650mm(W×H×D)(W-118/ W-118P) | |
Package dimensions | 610×360×480mm/0.11cbm |
610×575×715mm/0.25cbm (W-118/ W-118P) | |
Enclosure | Birch Plywood |
Net weight | 21kg(W-110)/40kg(W-118)/46kg(W-118P) |
Gross weight | 23kg(W-110)/43kg(W-118)/49kg(W-118P) |
