WiFi OBD-II Car Diagnostics Tool for Apple/ iPad / iPhone / iPod Touch
ID NO.:CTE018
WiFi OBD interface adapter is able to detect and interpret OBD2 / EOBD protocols automatically It also provides support for high speed communications and a low power sleep mode It use AT commands to communicate with a host device (PC, notebook, iPhone, iPod touch, iPad and so on)
WI-FI OBD AUTO CHECKER is able to detect and interpret these protocols automatically. It also provides support for high speed communications and a low power sleep mode. It use AT commands to communicate with a host device (PC, notebook, iPhone, iPod touch, iPad and so on). There are plenty of software packages available, which are fully compatible with WI-FI OBD AUTO CHECKER. Some of them have pretty useful features, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc. You can even write your own software on a specified hardware platform if you wish, because the AT commands are fully documented and very well explained. WI-FI OBD AUTO CHECKER is measuring only 2.7 x 1.25x 0.9 inches, and it comes attached with a 6 ft OBDII cable for easy installation. It also comes included with a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port. It is compatible with 1996 and later vehicles. Connecting to your iPhone / iPod touch /iPad is made by WIFI connection in adHoc mode.
Save on maintenance costs.
No power supply needed, just connect to your car
IMPORTANT NOTE: As the wholesaler, we provide the package containing the Car OBDII device"Apple" and "iPad" are trademarks of Apple Inc.,registered in the U.S.and other countries.
This is not claimed to be an authorized or branded product by Apple Inc., although it is compatible.
Function:
1. Primary Function:WiFi OBD-II Car Diagnostics Tool for Apple iPad iPhone iPod Touch
2. Compatible Apple Devices:Depends on the WiFi OBD Software used, but will require Apple iPhone, iPod touch and iPad iOS 3.0 or later and with WiFi capabilities.
Specifications:
1. Applicable Car Models: All models that support the OBD standard (for Volkswagen, for GM,for Honda,for TOYOTA, for Nissan, for Mazda,for Ford, for Peugeot,for Citroen,for BMW, for Audi,for Skoda,for Subaru, for Hyundai, for Kia, for Suzuki, for Opel, for Chyrysler, for Benz, for Porsche, for Renault, for Fiat, for Mitsubishi, for Isuzu, for Daihatsu, etc.)
2. Languages: Depends on WiFi OBD Software
3. Dimensions: 67 x 21 x 31mm
4. Cable Length: 1.88 meters
Support cars list:
For GM 1996 - to Date (OBD-II)
For Ford 1996 - to Date (OBD-II)
For Chrysler 1996 - to Date (OBD-II)
For Toyota 1996 - to Date (OBD-II)
For Honda 1996 - to Date (OBD-II)
For NISSAN 1996 - to Date (OBD-II)
Many other Asian and European 1996 - to Date (OBD-II)
Package list:
WiFi OBD-II Car Diagnostics Tool for Apple iPad iPhone iPod Touch
CD with User Manual
FAQ:
Q1: Will This Code Reader Work with My Car?
A1:
1.This OBD II Code Reader is specially designed to work with all OBD II compliant vehicles. It is required by EPA that All 1996 and newer vehicles (cars and light trucks) sold in the United States must be OBD II compliant and this includes all Domestic, Asian and European vehicles.
2.A small number of 1994 and 1995 model year gasoline vehicles are OBD II compliant. To verify if a 1994 or 1995 vehicle is OBD II compliant, check the Vehicle Emissions Control Information (VECI) Label which is located under the hood or by the radiator of most vehicles. If the vehicle is OBD II compliant, the label will designate OBD II Certified. Additionally, Government regulations mandate that all OBD II compliant vehicles must have a common 16pin Data Link Connector (DLC).
3.For your vehicle to be OBD II compliant, it must have a 16 pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant. This label is located on the inside of the hood on most vehicles.
Q2: My Apple device finds and connects to this product, but nothing is working?
A2: After you connect with WiFi, set a static IP on your Apple device with: IP 192.168.0.11 or 192.168.0.10 and subnet mask: 255.255.255.0.
