RTV All - Glass Silicone Aquarium Sealant Neutral Curing Water Stop
( OEM IS Available)
Scope Of Application:
Various interior decoration glass, aluminum alloy and glass device projects ; Various glazing projects
Seal & cementation of al-alloy door & window, storefront, show window, diagonal and skylight corner line
Good sealing performance for glass, glass fiber, pottery & porcelain and greaseless material
Instruction:
Clean the base material with cloth: clean it with solvent; if in particular demand, coat the surface with paint base and let it dry completely.
Make sure fill the interface with it and tightly stick to the base material .
Deal with adhesion test before the use and make sure good compatibility and viscosity of products and base material
Storage and Packing
Keep in dry place; dont unseal it before use; keep a storage temperature below 25 to prolong its service life; 12 moths guarante
2880ml / 300ml / 310ml(net capacity)
Optional Color: Black, white, transparent, or on requested.
Main Technology Data:
|
NO. |
Item |
Data |
|
1 |
Type |
Acetoxy |
|
2 |
Density g/cm3 |
0.98 |
|
3 |
Capacity movement |
±30% |
|
4 |
Skinning time |
5-15 minutes |
|
5 |
Drying time(2mm/h) |
8-10 |
|
6 |
Drying(4mm/h) |
18-22 |
|
7 |
Max. Tensile strength |
1.3 |
|
8 |
Hardness shore |
21±2 |
|
9 |
Elongation at Break(%) |
≥500 |
|
10 |
Modulus Mpa(100%) |
0.60 |
|
11 |
Application temperature |
-20 to +40 |
|
12 |
Temperature resistance |
-50 to +100 |
|
13 |
adhesive |
OK |
|
14 |
Weatherproof |
OK |
|
15 |
Cold-hot adhesive |
OK |
|
16 |
Under water adhesive |
OK |
|
17 |
Elastic Recovery Ratio |
96 |
|
18 |
Mass-loss Rate |
35 |
|
Skin drying time and fully drying time under: 23 and 50% humidity |
||
Standard: GB/T14683-2003
Restriction of Usage:
1, Unsuitable used on the material's surface that leaking grease, plasticizer or solvent.
2, It should be used in the ventilated places, because the silicone sealant need to absorb the moisture
in the air for drying.
3, Unsuitable used for frost or wet surface.
4, Unsuitable used for metal coated glass assembly
5, Unsuitable used for marble, granite and other alkaline substances joints sealing.
6, Unsuitable for construction on the material's surface that the temperature lower 6 or higher than 40
Technical support:
1, We would provides complete product technical information, technical advice and free compatibility test.
2, We would answer the user questions in using process promptly.
The interface design and construction method:
Please refer to.
Safety tips:
1, It will release of volatile chemical compounds of silicone sealants in drying process and may be harmful
to health if long-term inhalation, should maintain good ventilation when construction.
2, It will not release any harmful substances after dry, will not affect health.
3, Children do not contact the uncured silicone sealant, rinse with water and seek medical treatment if
contact with eyes;
Maintenance
It is no need to repair generally. Remove and cleaning the substrate surface if the seal joint is
damaged, and fill it with new silicone sealant. TIANYU brand silicone sealant can be very good adhere with the dried silicone sealant.
Attention:
Information published in this instruction is correct. However, but no means can it be considered
and absolute guarantee, as usage and application of the product in accordance with the instruction given
and success in application is beyond our control and is depend on many factors. Customers should have
a good knowledge of product and make independent judgments of optimal usage before application.
Joint show :
