Baby Carriage Lift up and Down Test Machine Durabiliy test for handle strength Strollers Testing Machine
Description:
This machine is suitable for hand push Baby Carriage beyond the obstacles made by the simulation under the pressure of raising durability test, and made by CNS test.
Theory:
Alternately raise and lower the handle(s) by applying a vertical force to the handle so that the rear wheels and front wheels in turn are raised (120 ± 10) mm, measured at the start of the test from the floor and then lowered in a controlled manner without pause.
Carry out the test for a total of 10 000 cycles at a frequency of (15 ± 2) cycles/min.
Where the downwards force necessary to lift the front wheels exceeds 450 N, carry out the test by applying alternately a downwards 450 N force and an upwards force necessary to raise the rear wheels for
3 000 cycles at a frequency of (15 ± 2) cycles/min, then continue the test by only raising the rear wheels
(120 ± 10) mm for additional 7 000 cycles at a frequency of (15 ± 2) cycles/min.
Specifications:
| Can be lifted under pressure | 50kg (500N) |
| Baby carriage handle fastness | Adjustable and replaceable |
| Lift under pressure capability | Height of front and back are adjustable |
| Adjustive space of handle joint | About 300mm |
| Auto counter | 99999times, electricity |
| Machine demension | 1650x1100x1900mm |
| Power | AC ~220V 50Hz |
| Weight | About 450KG |
| Standard | EN1888:2012 section 8.10.6.2.2 |
