8Kva - 2500Kva 4 Pole Brushless Ac Generator Drip Proof H Insulation Class
Standard :
Global Power industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE 0530, NEMA MG1-32, IEC34, CSA C22.2-100, AS1359.
Other standards and certifications can be considered on request.
Technical Specifications :
| Control System Ser.4 | Separately Excited by P.M.G. |
| A.V.R | MX321 | MX341 |
| Voltage Regulation | ±1.0% | ±1.0% |
| Control System Ser.4 | Self Excited |
| A.V.R | Standard SX460 | Optional AS440 |
| Voltage Regulation | ±1.0% | ±1.0% |
| Insulation System | Class H |
| Protection | IP23 |
| Rated Power Factor | 0.8 |
| Stator Winding | Double Layer Concentric |
| Winding Pitch | Two Third |
| Winding Leads | 12 |
| Stator Wdg. Resistance | 0.065 Ohms Per Phase at 22°C Series Star Connected |
| Rotor Wdg. Resistance | 0.83 Ohms at 22°C |
| Exciter Stator Resistance | 20 Ohms at 22°C |
| Exciter Rotor Resistance | 0.078 Ohms Per Phase AT 22°C |
| Maximum Overspeed | 2250 Rev/Min |
| | 1 BEARING | 2 BEARING |
| Weight Comp. Generator | 337 kg | 350 kg |
| Weight Wound Stator | 120 kg | 120 kg |
| Weight Wound Rotor | 110.69 kg | 110.69 kg |
| WR² Ineria | 0.6071 kgm2 | 0.5754 kgm2 |
| Shipping Weight in a crate | 360 kg | 371 kg |
| Packing Crate Size | 105 x 57 x 96(cm) | 105 x 57 x 96(cm) |
| | 50 Hz | 60 Hz |
| Telephone Interference | THF<2% | TIF<50 |
| Cooling Air | 0.216 m³/sec 458 cfm | 0.281 m³/sec 595 cfm |
| Voltage Series Star | 380/220 | 400/231 | 415/240 | 440/254 | 416/240 | 440/254 | 460/266 | 480/277 |
| kVA Base Rating for Reactance Values | 72.5 | 72.5 | 72.5 | 70 | 83.8 | 87.5 | 87.5 | 93.8 |
Our Features :
1) four-pole brushless self-excited, drip proof structure.
2) The stator, wound in 2/3 pitch, can effectively inhibit the waveform distortion of the output voltage, and reduce the heat of the magnetic field.
3) The rotor will reduce the voltage deviation and temperature rise under non-constant load with the assistance of dynamic balance and the impeccable damper before assembly.
4) The output power of the exciter rotor will supply the main rotor through a three-phase full-wave bridge rectifier, which is protected by a surge suppressor, in order to avoid damage from the shock caused by the out-of-step phase on short circuit or in parallel.
5) Automatic Voltage Regulator has the characteristics to protect he automatic load-shedding function of an engine. It will quickly reduce the output voltage of a genset if the engine speed is lower than the normal speed, which helps the engine or prime mover recover rapidly in the sudden heavy load.
Windings & Electrical Performance:
All generator stators are wound to 2/3 pitch. This eliminates triplen (3rd, 9th, 15th …) harmonics on the voltage waveform and is found to be the optimum design for trouble-free supply of non-linear loads.
The 2/3 pitch design avoids excessive neutral currents sometimes seen with higher winding pitches, when in parallel withthe mains. A fully connected damper winding reduces oscillations during paralleling. This winding, with the 2/3pitch and carefully selected pole and tooth designs, ensures very low waveform distortion.
Terminals & Termianl Box:
Standard generators are 3-phase reconnectable with 12ends brought out to the terminals, which are mounted on a cover at the non-drive end of the generator. A sheet steel terminal box contains the AVR and provides ample space for the customers' wiring and gland arrangements. It has removable panels for easy access.
Our Picture:
Guarantee:
1) Guarantee Period: One year or 1000 running hours whichever comes first.
2) During the guarantee period, the spare-parts will be sent through your shipping agency in China.
3) Spare-parts can also be sent by air express.
4) 24 hours service hotline is available for customers.
Our Service :
1. If you are interested in our products we sincerely invite you to take a visit of our factory when you are in China. We can drive to pick you up and visit our factory.
2. Suggest the best choice or referential suggestion based on customers’ information. Answer all questions about the product from customer.
3. Build customers’ profiles, follow-up service, make regular calls on customers.
contact information :
Lucy
Skype : Lucy GP
Mobile : 18762672879
TEL: 0510-85732061
