Maybe you haven't known about me - 
,
but you might have used products
made by my Laminating Machine
50 KW Robot PU Moulding Machine High Pressure Water Heat Exchanger
Preface:
HC-206 Series —
Hydraulic Pu Moulding Machine For Automobile Inner Decoration Parts Production Line
The standard mould carrier 2100x1400mm is designed to foam the backside of parts with Polyurethane such as Dash inner, tunnel, half carpet or other part which max dimensions are approx.1800x1100mm.
This mould carrier is designed for high volume production (improved cycle time).
It is usually implemented in line with other similar mould carrier to share operation work-content.
When the manufacturing line of automobile inner decoration parts was successfully integrated with the latest CO2 PU foaming technology, we have set a new record in upgrading automobile production technology by ensuring it with energy conservation, low carbon but high quality.
Technical Parameters:
|
Closing force |
400 kN |
|
|
Opening force |
40 kN |
|
|
Maximum weight of upper tool: |
3 To |
|
|
Maximum total tool weight: |
6 To |
|
|
Use of the mould carrier |
Up to 24 hours/day – 7 days/week |
|
|
Opening |
60° |
|
|
Closing Stroke |
500 mm |
20 in |
|
Maximum Daylight |
1350 mm |
53 in |
|
Minimum Tool height |
850 mm |
33.5 in |
|
Height of lower platen / ground |
400 mm |
16 in |
|
(without any foundation) |
||
|
Upper platen stroke when open |
500 mm |
20 in |
|
Platen size |
2100 x 1400 mm |
83 x 55 in |
|
Mixing heads in upper plate |
1 or 2 (to be specified at order) |
|
|
Opening in upper plate |
1200 x 600 |
47 x 23.5 in |
|
T slots in Lower & Upper platen |
T-slot 18 DIN 650 (See drawing) |
¾ in |
|
Flatness of platen |
± 0.2 mm / m |
±0,008 in |
|
Max platen flexion under full load |
0.2 mm/m |
0,008 in |
|
Max platen flexion under full load |
0.2 mm/m |
0,008 in |
|
applied on 2/3 of the surface |
||
|
Closing time |
10 sec |
|
|
Opening time |
10 sec |
|
|
Hydraulic oil cooling |
Oil / Water heat exchanger |
|
|
Retention box |
Oil retention box under the hydraulic power unit and all isolated hydraulic component |
|
Applicable scope:
- Car steering wheel,
- seat,
- instrument panel,
- ceiling/ roofing,
- carpet,
- sound insulation pad,
- filter,
- front dash, and so on.
Successful Case of Hydraulic Pu Moulding Machine :
Development theme:
The Automobile Inner Decoration Parts Production Line consists of one multi mixing heads high pressure PU injection machine, single component hydraulic mold carrier, dual component hydraulic mold carrier, mobile hydraulic mold carrier, infrared automatic preheating line, automatic EVA conveying line, automatic robot cutting equipment.
With the globalization of the international automobile industry, automobile industry in our country is developing by leaps and bounds. Supported by all these years cooperation with overseas automobile companies, we have introduced European standards in large scale manufacturing quality inner decoration parts for automobile industry, which not only catered the domestic market demand on automobiles inner decoration parts, but also highly consumed by global auto industry powers, such as Europe, United States.
