Polyurethane Foam Insulation Equipment For Pu Furnitures Production
Preface
HC-202 series low pressure PU Foaming Machine is our classical injection machine which was designed for PU furniture production lines. It consists of frame work, materials day tanks, cool / heat water heater, gear pumps, inverters, high speed stirrer, PLC computer control system and other accessory elements.
Its HMI provides powerful function menu when planted with temperature control, pressure, speed parameter settings, pouring recipes, faults alarm and so on.
To cater numerous production requirements for different customers, we have developed multi-conponent and –function equipment for the market, which have played a big role in stimulating, speeding up the development of polyurethane industry around the world.
Main Technical Parameters:
|
No. |
Item |
Technical Parameter |
|
1 |
Foam Application |
Flexible, rigid, semi-rigid Foam blocks |
|
2 |
Raw Material Viscosity (22) |
POLY ~2500MPas ISO ~2500MPas MC ~ NA |
|
3 |
Injection Pressure |
10-20Mpa (adjustable) |
|
4 |
Output (mixing ratio 1:1) |
50~800g/s |
|
5 |
Mixing Ratio Range |
1:2~5:1(adjustable) |
|
6 |
Injection Time |
0.5~99.99S (correct to 0.01S) |
|
7 |
Material Temp Control |
±2 |
|
8 |
Repeat Injection Accuracy |
±1% |
|
9 |
Hydraulic System Output: |
10L/min |
|
10 |
Tank Volume |
300L |
|
11 |
Compressed Air Needed |
600NL/min |
|
12 |
Temperature Control System |
Heat: 2×9Kw |
|
13 |
Input Power |
three-phase five 6square milimeter-wire 380V |
- Air compressor (max air press 8kg/cm2), long enough air pipe(6.5*10mm)with connectors.
- Electricity source: 380V/50Hz. Three Phase five lines.
- Raw material: A(POLY), B(ISO) and MC clean agent.
- Moulds and release agent.
- Lift equipment: According to the client’s needs.
Electrical control system
1. Fully controlled by PLC system
2. Large PCL touch screen computer.
