V1.3 UPA USB programmer main unit.
from vipprogrammer.com
software version: V1.3
Hardware version: V2015
Supported list:
EEproms
Simply connect the mainboard to the UPA programmer directly or by using a
DB9 male / female extension cable (1:1). Insert the correct config key
into the slot of the mainboard and start programming either via the ZIF
or SOIC Socket. You can also use the included DIL to 10pin Flat-ribbon
header, put it inside the ZIF socket and wire up an SOIC clip or clamps
for ISP use from there.
Motorola MCU's
Pick the Adapter you want to use, attach the flat cable to the
Adapter (PIN1 is always indicated, on both the cable and also the
Adapter) and also to the main board's 10pin ISP connector. Select the
VCC supply source by the jumper on the mainboard next to the ISP
connector (on = target supplied from upa, off = target got own supply).
Slide the Adapter over the soldered PLCC MCU on the target PCB. (No
soldering, no pinout reviewing, no pin counting, saves lots of time and
hassle and let's you make your job faster, precise and easier)
Once your workshop is equipped with our Adapter Set you will have a all new UPA Experience.
STMicroelectronics ST62*:
ST6240, ST6245, ST6249
NSC CR16*: CR16HCS5(9), CR16MCS5(9), CR16MES5(9), CR16MFS5(9), CR16MCT5/9, CR16HCT5/9
for Motorola HC05*: MC68HC05B6, MC68HC05B8, MC68HC05B16, MC68HC705B16,
MC68HC05B32, MC68HC05E6, MC68HC705E6, MC68HC05H12, MC68HC05L28,
MC68HC05P3, MC68HC705P3*,MC68HC05X16, MC68HC05X32
for Motorola HC08*: MC68HC08AS20, MC68HC08AS32, MC68HC08AS60, MC68HC08AZ32, MC68HC(9)08AZ32A, MC68HC908AZ60, MC68HC908AZ60A
for Motorola HC11*: MC68HC11A1, MC68HC11A8, MC68HC11E9, MC68HC11EA9,
MC68HC11E20, MC68HC11F1, MC68HC11K4, MC68HC11KA2, MC68HC11KA4,
MC68HC11KG4, MC68HC11KS2, MC68HC11KS8, MC68HC11L6, MC68HC11P2,
MC68HC11PA8, MC68HC11PH8
for Motorola HC12*: MC68HC912B32, MC68HC912BE32, MC68HC912D60, MC68HC912D60A, MC68HC912DC128A, MC68HC912DG128, MC68HC912DG128A
for Motorola HCS12*: MC9S12D64, MC9S12A128, MC9S12DG128, MC9S12DG256, MC9S12H128, MC9S12H256
Atmel 8051 Architecture: AT89S51, AT89S52, AT89S53, AT89S8252, AT89S8253
Atmel AVR 8-Bit Risk: AT90S1200, AT90S2313, AT90S2323, AT90S2333,
AT90S2343, AT90S4433, AT90S4434, AT90S8515, AT90S8535, ATmega8,
ATmega16, ATmega161, ATmega162, ATmega163, ATmega323, ATmega64,
ATmega103, ATmega128, ATtiny12, ATtiny15, ATtiny2313
Microchip PIC12: PIC12F508, PIC12F509, PIC12F629, PIC12F675
Microchip PIC16: PIC16F627(A), PIC16F628(A), PIC16F648A, PIC16F72,
PIC16F73, PIC16F74, PIC16F76, PIC16F77, PIC16F818, PIC16F819, PIC16F83,
PIC16F84(A), PIC16F870, PIC16F871, PIC16F872, PIC16F873(A),
PIC16F874(A), PIC16F876(A), PIC16F877(A)
EEPROMs I2C: 24C01, 24C02, 24C04, 24C08, 24C16, 24C32, 24C64, 24C65,
24C128, 24C256, 24C512, 85C72, 85C82, 85C92, BAW574252, GRM-003,
GRM-004, GRM-005, KKZ-06F, MCM2814, PCA8581, PCF8581, PCF8582, PCF8594,
PCF8598, PCF85102, PCF85116, SDA2516, SDA2526, SDA2546, X24C00, X24C01
EEPROMs Microwire: 7002, 93C06, 93C14, 93C46, 93C56, 93C57, 93C66,
93C76, 93C86, 93S46, 93S56, 93S66, GRN-001, GRO-002, KKZ-01, S220,
S2914, ST61907, XLS93C46
EEPROMs SPI: M35080, 25C010, 25C020, 25C040, 25C080, 25C128, 25C160,
25C256, 25C320, 25C640, M25P05, M25P10, M25P20, M25P40, M25P80, ST95010,
ST95020, ST95040, ST95080, ST95160, ST95320, ST95640, ST95P02, ST95P04,
ST95P08, X5043, X5045
EEPROMs Miscellaneous: CXK1011, CXK1012, CXK1013, M6M80011, M6M80021, M6M80041, SDE2506, TC89101, TC89102
*EEPROM Only
NEC ..uDP780828A uDP780948 uDP780949 uDP780973 uDP780974
TMS...TMS370CX02 TMS370CX32 TMS370CX36 TMS370CX42 TMS370CX56 TMS370CX56 TMS370CX56 78K0/HC912
TMS370CX58 TMS370CX58 78K0/HC912 TMS375C006
UPA USB Programmer Package contains:
1x UPA programmer
1x USB cable
1 x Mainboard with 40pin DIL ZIF (600mil) socket and 14pin SOIC ZIF (150mil) socket
