500 kg / h Floating Fish Feed Extruder Machine / Rice Husk Pellet Making Machine
1.Introduction of the small floating fish feed pellet machine :
1) Fish Food Machine can make kinds of feed for different fish, such as food fish,catfish, shrimps, crab, etc. the fish pellet made by the machine can float on water more than 24 hours.
2) It apply to the preachment of the animal fodder so as to reduce loss of nutrition, advance the portend content.
3) It can also make many kinds of fodder for different kinds of animals.
4) Low energy consumption , high yield; simple operation, high reliability.
small floating fish feed pellet machine:
With different molds, the machine can produce different diameter food, such as 1.5mm, 2.5mm etc. So the food can meet different stage fish. The food can be floating 24hours.
2. Parameter of the small floating fish feed pellet machine:
|
model |
capacity |
power |
the grain-size |
screw diameter |
|
PH52 |
50-60kg/h |
5.5+0.75kw |
1.2-6mm |
52mm |
|
PH65 |
80-100kg/h |
11+0.75kw |
1.2-6mm |
65mm |
|
PH75 |
140-160kg/h |
15+0.75kw |
1.2-10mm |
75mm |
|
PH95 |
260-300kg/h |
22+0.75kw |
1.2-10mm |
95mm |
3. Features: floating fish feed machinery/floating fish feed extruder
1. According to different requirements, variety shapes of high-grade feed pellets for fish, shrimps .etc can be produced.
2. The finished pellets can keep floating for 3-15 hours without pollution to water.
3. The floating time can be controlled by the puffing degree adjustment.
4. Floating fish feed machine can make pellet from dia.1.0mm-20mm just by changing the mold.
5. Electric heating device is adopted which can improve the feed expansion rate and pellets floating time.
6. High temperature and high pressure cooking process can kill the salmonella and bacterial infections and also makes the pellets easily to digest.
7. The cutting device can be adjusted to make pellets of different length.
4. Working principle of the small floating fish feed pellet machine:
There is no need to heat outside the machine, through the screw extruding of the raw material, produces heat during the rotary working process, and gathers heat in the airtight environment to reach ripening, during the high temperature ripening process, the starch and fiber of the raw material become swell, on the pressure-tight condition, spray up from the mold outlet through the high pressure produced by the regular rotating of the screw, after cutting by the forepart cutter which rotates regularly and high-speedily, the finished product will be shrunk and become small average ball.
