2.4 Ghz Wifi Antenna 2 Dbi 9mm Diameter Wifi Yagi Antenna Outdoor
Introduction :
Total Length of the antenna: including the connector 115mm
Diameter : 9mm
Connector : SMA normally, can be made SMB,TNC etc
Body color: white, black, gray or customized.
1 Electrical Characteristics
Form 1
|
No. |
Item |
Specifications |
|
1 |
Frequency(MHz) |
2400~2500 MHz |
|
2 |
V.S.W.R(in BW) |
≤2.0:1 |
|
3 |
Gain(Zenith) |
2 dBi |
|
4 |
Polarization |
Vertical |
|
5 |
Impedance |
50 Ω |
1.2 Mechanical
Form 2
|
No. |
Item |
Specification |
|
1 |
Cable |
— |
|
2 |
Connector |
SMA-JW |
|
3 |
Plastic Housing |
White |
2 Environmental Specifications
Post Environmental Tolerance (Refer to the form 1~2 )
Condition: Temperature range 25±3°C
Relative Humidity range 55~75%RH
Operating Temperature range -40°C~+85°C
Storage Temperature range -40°C~+100°C
4.1 Moisture Proof
The device should satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature 40±2°Cand the relative humidity 90~95% RH for 96 hours and 1~2 hours recovery time under normal condition.
4.2 Vibration Resist
The device should satisfy the electrical characteristics specified in form 1~2 after applied to the vibration of 10 to 55Hz with amplitude of 1.5mm for 2 hours each in X , Y and Z directions.
4.3 Drop Shock
The device should satisfy the electrical characteristics specified in form 1~2 after dropping onto the hard wooden board from the height of 30cm for 3 times each facet of the 3 dimensions of the device.
4.4 High Temperature Endurance
The device should satisfy the electrical characteristics specified in form 1~2 after exposed to temperature 80±5°Cfor 24±2 hours and 1~2 hours recovery time under normal temperature.
4.5 Low Temperature Endurance
The device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature -40°C±5°Cfor 24±2 hours and to 2 hours recovery time under normal temperature.
4.6 Temperature Cycle Test
The device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the low temperature -25°C and high temperature +85°C for 30±2 min each by 5 cycles and 1 to 2 hours recovery time under normal temperature.
Antenna display:
