2.54mm Pitch 2 Pin Through Hole Connector Assembled For Household
Specifications:
1) Poles: 2-24
2) Pitch: 2.54mm
3) Applicable wire: AWG #28 - #22
4) Applicable PC board thickness: 1.2mm~1.6mm
5) Temperature range: -25 ~ +85C
6) Rated voltage: 300VAC/DC
7) Rated current: 3.0A
8) Connect resistance: 0.02
9) Insulation resistance: 1,000m
10) Voltage withstanding capability: 1,000V AC/min
11) Material:
a) Housing: nylon UL940v-0
b) Terminal: phos bronze, tin / plated
c)Wafer: nylon UL940-0
Key Information :
Series |
MTA-100 |
Packaging |
1000pcs/bag |
Contact Type |
Male Pin |
Connector Type |
Header, Unshrouded |
Number of Positions |
2 |
Number of Positions Loaded |
All |
Pitch |
0.100" (2.54mm) |
Number of Rows |
1 |
Row Spacing |
- |
Contact Mating Length |
0.295" (7.49mm) |
Mounting Type |
Through Hole |
Termination |
Solder |
Fastening Type |
Friction Lock |
Features |
- |
Contact Finish |
Tin |
Contact Finish Thickness |
- |
Color |
Natural |
Key feature
- Post to withstand 13 newtons (3 LBS) min. Axial force in both directions shown without dislodging.
- Tolerances apply to solder side of board.
- Measured at surface A
- Plastic flash permitted in this area.
- Parts comply with AMP solderablity SPEC.NO. 109-11-2
- One hole may be undersized (032-035 DIA) For assembly retention during wave soldering.
- Material: header-thermoplastic polyester
UL94V-O (Natural)
Post-copper alloy (tin-plated)
- Coordinate dimension applies from center of actual feature.
- Plastic burrs caused by cut-off tolling are permitted within the maximum tolerance envelope.
- Posts to be measured when strip is held flat
- Posts musts withstand two 90° bends against extrusion without breaking.
- Dimension should be .130 MIN when mating with A MTA 100 connector assembly or A CST 100