Gcr15 Material Thrust Ball Bearing

Structure: Thrust
Type: Ball
Brand: KGS
Bore Size: 120 mm
Outside Diameter: 170 mm
Model Number: 53224
Seals Type: Open
Number of Row: Single Row
Certification: ISO9001:2000

Description of single direction of Thrust ball bearing
1)Thrust ball bearing ring is called the shaft washer and the seat, the seat inner diameter slightly larger than the shaft ring;
2) Part of the series bearing with spherical seat and aligning seat, you can play the role of aligning;
3)The general use of steel stamping cage, the rolling element and cage fixed as a whole;
4)  The contact angle is 90 °, subject to pure axial load;
5) The double-row bearings composed of two seat, and a shaft ring, can accommodate axial loads;

Thrust ball bearings can withstand high thrust loads when running the design, the ball rolling with a washer-shaped ring rolling Erdaogou form. As for the saddle-shaped ring, therefore, thrust ball bearings are divided into flat seat type and adjusting thrust ball bearings hheey spherical saddle-type of two types. In addition, such bearings can withstand axial load, but can not bear radial load.

Said shaft and the shaft with the ring, and the shell with the said seat.
Thrust ball bearing type:
Acceptance of the situation points and two-way one-way thrust ball bearings thrust ball bearings. one-way thrust ball bearings can withstand axial load.
Thrust ball bearings, can withstand two-way axial load. Thrust ball bearings, ring and the shaft with them. Appear before the installation of seat spherical bearing, with self-aligning properties, could reduce the installation error.
Thrust ball bearings can bear radial load, lower speed limit.

Introduction
Thrust ball bearing is composed of race, blowout patch and cage.

Application fields
Crane hook, vertical pumps, vertical centrifuge, jack, low speed reducer

Thrust ball bearings consist of two precision chrome steel washers (ring) and a ball complement spaced by bronze retainer. They can be supplied with or without radius ball grooves in the rings. Thrust bearings are used under purely axial loads.Thrust ball bearings can handle loads in the axial direction only. Bearing rings mounted on the shaft are called shaft washers, and those mounted in the housing are called housing washers. Both washers contain raceways for the balls.Thrust ball bearings are available as both single and bi-directional types. The bi-directional thrust bearing incorporates a third washer and an additional set of balls. This center washer is located in the axial direction by a shaft shoulder and sleeve.Care must be taken in handling to prevent damage to the separable rings and ball assemblies