Dual 10 inch line array system active powered sound indoor outdoor
W-210B&W-210BP is a line array system which is made of two 10＂neodymium woofers, one 3＂titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of wave phase philosophy. Wherever low frequency extension is required.
Model | W-210B & W-210BP(Active) |
Type | Line array system |
Frequency Response | 60Hz-20KHz±3dB |
Power handling | LF 700W(RMS)1400W(PEAK) |
HF 100W(RMS)200W(PEAK) | |
Power amp | 900W/8ohm (W-210BP) |
Amplifier type | Switching power amp, class D circuit |
Other functions | Built-in crossover(W-210BP) |
Sensitivity | LF 101dB(1W1M) |
HF 109dB(1W1M) | |
Max S.P.L | LF 127dB(PEAK/1M) |
HF 129dB(PEAK/1M) | |
LF section | 2×10"(260mm) neodymium woofer |
75mm(3in)coil | |
Nominal impedance | 8 ohm |
HF section | 1×3" neodymium compression driver |
with 75mm titanium diaphragm | |
Nominal impedance | 8 ohm |
Output section | 2-channel |
Dispersion pattern | 110°H×10°V |
Finish | Water-proof,wear-resistant textured |
black paint | |
Array design | Arrays of less than 3×W-210B will |
provide poor dispersion control and | |
are neither recommended nor supported | |
Speaker cables | LF 1(+)1(-) HF 2(+)2(-) |
Rigging system | Please refer to the W-210B user's |
manual before any operation | |
Input connectors | 2×NL4MP speakon |
Recommend crossover | LF 70Hz-2KHz |
HF 2KHz-20KHz | |
Dimensions | 737 * 288 *415mm(W x H x D) |
Package dimensions | 810 * 360 * 480mm/0.14cbm |
Enclosure | Birch plywood |
Net weight | 31kg (W-210B) 34kg(W-210BP) |
Gross weight | 31kg (W-210B)35kg (W-210BP) |
