Fan Motor Stator Semi-automatic Coil Winding Inserter Machinery
The coil winding inserter is supplied with a special one piece insert tooling designed to suit the stator lamination.Due to the design and construction of the tooling we can achieve very short end turns heights which results in minimal final forming to achieve the correct dimensional result. The stator coil winding inserting machine can insert coil and wedge simultaneously. This HMI can set all the necessary data. This machine is suitable for three phase motor, fan motor and other motor, with a veriety model number but low output. It has the characteristic of widely application, high automation, easy operation and convenient tooling change.
Application:
This stator coil winding inserting machine is suitable for three phase motor, fan motor and other motor, with a veriety model number but low output.
Specification:
| Stator I.D | 20~110mm |
| Stator O.D | 0~160mm |
| Stator stack length | 20~150mm |
| Tooling travel | 60mm |
| Appropriate wire | Copper/Alum wire |
| Slot number range | 8~48slots |
| Power source | 380V/50/60Hz 3Kw |
| Dimension | 1500*680*1500mm |
| Weight | ≈ 400kg |
Information needed for stator winding inserting machine inquiry
It will be better if customer could send us detailed drawing including below information.
1. Stator lamination drawing
2. Stator stack drawing
3. Wire connection drawing
4. Stator application
5 Required productivity
6 Other technical requirement
Stator coil inserter
The stator parameter can be set in the touch screen.
