Powder Center of Powder Spraying

Powder Center of Powder Spraying
The special design of the magic rapid color changing center (powder pump rack can install with 6 set air guns). The center will replace the ordinary type of powder barrel supply way, the advantages are listed as below. 
1. The center can clean all powder pump and powder pipe automatically, conveniently and quickly. The cleaning process only needs 10-20 minutes. 
2. It can directly use the pack carton of powder supplier, it is convenient to adapt to small quantity production. 
3. Two diffluent powder boxes of 100L are used for change of different colors. 
4. Independent air absorb system with filter core prevents powder to overflow. At the same time it is also the ideal place for clean up. 
5. The center uses MINICYCLONE to separate the recalled powder to save powder. 
6. Touch screen control panel is mated for convenience and fast operation. 
7. The system uses screen mesh to clear the recycling powder scrap. Powder centre that can install 6 sets powder absorb parts is a compact powder supply system. The system directly transmits power out from the collect powder hopper, this kind of special design is means to quickly clean up all parts which powder still stick on that realizes the fast speed of color changing. Transmitter unit is installed on an upswing gear. They can automatically change color level under the control of the powder sensor which following. The exhaust quantity of central powder box with exhaust system is 3, 000 [Nm3/h]. The starting power is 3[kW] with 3 pieces of filter core. It is manual operation way to start filter cleaning system and waste powder bucket. The maximum quantity of powder absorb pipe in powder feeder system is max 24. The pipe is used in lifting gear unit and automatic cleaning system. The powder sensor is used for powder vibration board. The system has 2 units powder flowing barrel. The control system installed in the central powder box has display operation panel.