universal concrete compression testing machine/manhole compression tester
Product Introduction:
This machine is mainly used for materials such as brick, stone, cement, concrete etc
compressive strength test, also compressive performance test for other materials.
System includes a digital servo valve, highprecision sensor, controller and software, high control precision, good reliability. Satisfy the standard of GB, ISO, ASTM, etc for material such as cement, mortar, concrete test requirements.
System has the following functions:
1, With functions of force closed loop control;
2, Can realize such as load rate, load or stress rate loading, etc;
3, Electronic measurement is realized by using microcomputer, automatic test;
4, Computer automatic calculation results and print the report.
5, Test report can be designed self to export to Excel.
Technical parameters:
1 The maximum test force KN 2000
2 Test force range KN 10%-100%FS
3 Test force shows value relative error ≤±1% of the shows value
4 Test force resolution 0.01kN
5 Hydraulic pump rated pressure 25MPa
6 Loading rate 0.3KN/S~10KN/S
7 Loading speed Error ±5%
8 Oil pump rated flow 1.52L/min
6 The upper and lower bearing plate size 260x300mm
7 The Max. spacing between upper and lower pressure plate 300mm
8 Piston diameter φ250mm
9 Piston stroke 30mm
10 Power of motor Three phase,0.75 kW
11 Dimension 870×450×1400mm
12 Weight 800Kg
