Waste Tire Recycling Machine Rubber Powder Production Line Semi Automatic
Product Description
1. Instructions of the line
(1) This line is applied to recycle tires less than diameter 1200 mm to crumb rubbers.
(2) A complete set of waste tire recycling production line is automatic, from drawing out steel
wires, cutting whole tires into tire blocks, shredding tires into tire chips, grinding tire chips into
tire granules, and milling rubber granule into rubber powder you get as final products.
2. Steps of treating waste tires
First step: push a tire to the tire debeader, then a hydraulic lifting device will lift the tire in order
that the hook can reach the tire. Then the hook works hydraulically pull out the wires from the tire.
Second step: the shredder will shear the tires into 50mm with the help of a running circle sieve.
Sieve size: 50*50mm
Third step: A belt conveyor will convey the shredded tires into the double roll grinder for crumb
rubbers. A screening machine with two outlets: correct size will come out from the down side
outlet; oversized will come out from upside outlet and be conveyed to the grinder again by
another belt conveyor. Repeat this procession; you will get the size you want.
Fourth step: correct size rubbers will come to a screw conveyor, then be conveyed to the
multi-layer magnetic separator. With the ferment magnetic rolls, steels will be removed thoroughly.
Fifth step: after the steels are removed, it may also remain some textiles in the crumb rubbers,
so a fiber separator will be used to separate the textiles from rubbers according to gravity
difference and air flow.
By now, 99.9% purified rubbers will be got. And if you wanna pure rubber powder, just need
the Rubber Granule Superfine Miller, final products as fine rubber powder.
3. Capacity
We have four standards capacity for your choice: 0.3 tons/h, 0.5 tons/h, 1 tons/h, 2 tons/h.
We can help design any special capacity subject to your specific requirement.
| Annual handling ability | 1500-10000tons/h |
| Materials being handled | ≤ Φ1200mm worn-out tires(fiber, steel, radial tires ) |
| Granularity of finished products | 40-100 mesh |
| Power consumption | Less than 380kwh |
Tyre crumb crush machine.
High performance, heavy duty systems designed for recycling of car, truck and OTR tires.The
system is ideal for tire recycling....
The line is complete automatic line, from drawing out bead wires, crushing the whole tyre,
separating the thin steel and fiber to the rubber powder, The line is recycling the waste tyre
under the normal temperature.
Our tire recycling line is designed to make rubber powders.
We have 4 standard capacities : 1500ton/year, 3000ton/year, 6000ton/year
And this kind of tire can be applied to
1. Auto industry (vibration absorbing materials, shock absorber).
2. Rubber products (safety cushion, road isolation barrier, rubber tube, rubber plate, rubber
sole and so on)
3. Athletic sports ground surface materials (court, prefabricated rubber running track)
4. Road engineering and bituminous road mad surfacing (to be mixed with asphalt and be used
for surfacing roads or sleeper of railway, underground railway and so on)
5. Building materials (rubber tile rubber floor brick, water proof coil, vibration proof foundation
applied in construction and so on)
6. Agricultural use (pavement of stock farm and son)
