.jpg)
1. The part A is the main part of TG-880 turbine ventilator, it is equipped with UBC bearing which is imported from the USA.
2. The part B is the middle part of the ventilator. The upper part of B is round and the lower part is square. We can design different sizes of this part according to your request.
3.The part C is the pedestal of the ventilator, which can fit for various roofs. It can be installed in any place by adjusting the level of the ventilator.
4.The ball diameter (body diameter) is 880mm, and the throat diameter (inner diameter) is 680mm.
5.The volume of air discharge is about 2600 to 6500 CBM/H.
6.There are three kinds of materials they are made of: (A) stainless steel, (B) vanes stainless steel+ others galvanized sheet, (C) vanes aluminum + others galvanized sheet.
The characters and the advantages of TG Rooftop Turbine No-power Ventilator
1. The theory of its running
Our no-power ventilators needn't electric power instead of easily driving the turbine vanes to rotate by nature breeze or the temperature difference between indoor and outdoor so as to make true the running without cost. They are really practical and energy-saving products without noise and pollution so they can save much electricity and labors for users, in order to lower production cost clearly, to improve the working
surrounding of the workshop, to rise the working efficiency and even to strengthen the quality of their products.
2. The constitutes of the material
Our no power ventilators are made of whole stainless steel, galvanized sheet and aluminium which needs no maintenance longer, are anti-acid and anti-erosion by the only once investment. TG Rooftop ventilators set up UBC bearings which are imported from the USA and can be assured for using about 15 years.
3. The values of no power ventilators
A. They can exhaust the hot air, waste gas, dust and other harmful gas; meanwhile, the fresh air outdoor can come into the workshop so as to better the working surrounding, to make the workers more energetic and to increase the benefits of the
company.
B. Lower the users' production costs. Because our no power ventilators belong to the products which need no electric power and other consumes for the lifelong time after the only once investment. To a large extent, they can lower the users' product costing.
C. Enhance the concept of their safety in workshop.
First of all, if there is no much harmful gas in workshop, the air can ventilate normally so that they needn't to worry about the dangerous accidents caused by bombing or mistakenly using the electric power.
Secondly, in case there happens the fire in workshop, our Roof Turbine ventilators on the roof can make the smoke indoor flow out more quickly, at the same time which can bring out more time for the victims to escape and reduce the loss by the accident.
D. They can demonstrate the strength and the humanization management of the enterprise, enhance the "people oriented" principle of the modern enterprises and make a show of the time's colorful image.
E. Beautify our living and working surrounding. These no power ventilators are possessed with an attractive appearance, so they can play their part in beautifying the surrounding.
Primary Competitive Advantages:
Well and High Quality Control
Prompt Delivery
Customer's Designs and Logos are Welcome
Prompt Delivery
Customer's Designs and Logos are Welcome
Earth-friendly Products
Eco-friendly products
Small Order Acceptable
Small Order Acceptable
The Quantity for Installing Our Ventilators:
(References: The ventilating times of the different buildings)
The ventilating cube=the cube of the building × the ventilating times
Ventilating cube
Installing Quantity = ----------------------------------
ventilating cube/hr
For example:
There is a building which is 50M length, 12M width and 6M height. The difference in temperature between indoor and outdoor is 10℃, and the wind speed is 9.6KM/hr. Moreover the ventilating times of the casting factory according to the standard material is between 10 to 30 times per hour. So the ventilating cube is
(50×12×6) ×10 times/hr = 36000cube/hr .
3600cbm/hr
--------------------------------------------------------------------------- =14.6(units)
2458cbm/hr(according to the different model 880/500/300)
2458cbm/hr(according to the different model 880/500/300)
So we'd better install 15 units' ventilators for the workshop.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
