Paywelder With Four Power Source

Paywelder Welding Pay Tractor   The paywelder welding pay tractor is mainly used for onshore oil and gas pipeline construction process. Used for lifting welding tent when pipeline welding,Website:http://www.pipelineautoweld.com, and providing power for welding equipment.Technical points and advantages of DP paywelder welding pay tractor:Design to better performancePatented design of rigid straight connecting of engine, generator and hydraulic pumpAfter hydraulic clutch system is designed, unloaded power consumption of pump is only 1.2kw during welding process, while unloaded pump power would be 9.5kw without hydraulic clutch system, only this can saves 8.3kw, and save fuel cost around RMB50,000-100,000 a year(calculation based on Dongfeng Cummins 6BTA5.9-C170,at setting of 1500rmp and fuel consumption rate219g/kwh)There are embedded hook in the platform to be easily craned up of whole machine.All hydraulic components are from well-established international brands. Very stable performance, and easy to find spares.Adopt hydraulic flexible walking system for smooth operations of starting and stopping.The servo pilot operating system is easy and precise to be operated, and it can realize continuously variable transmission between two different speed settings.Depending on powerful traction, the machine can achieve steering operation easily on uneven terrain, can walk in sloping area, and has excellent cross-country performance on hilly and wetland areas.People oriented, comfortable working spaceFairshaped design of operation lab, allows 360 full visibility, and it is more convenient for operating on the construction site.With its three-level adjustable headrest, the seat is designed in compliance with modern ergonomic standards, to reduce tired feeling.Easy maintenance to realize the high efficient performanceOverhaul platform at both sides, it is convenient for examining and maintenance of engine, generator and hydraulic system.The large space can bear 4 welders and other equipment making it convenient for site operations.With full closed ship from chassis in walking assembly, dirt not easy to store up, cleaning becomes easier and simpler.Model and specificationTechnical Specification of MPS-H80 & MPS-H100ModelMPS-H80MPS-H100Overall Weight10300KG11500KGDimensions(lxwxh)5500*2600*3050mm5500*2600*3050mmRecommend carrying electric welding machine number (need customer equip)2 units DC4004 units DC400EngineTypeCummins 6BT5.9-C170      Turbo-charged, water-coolingCummins 6BT5.9-C180      Turbo-charged, water-coolingPower125kw      (power state 111kw/1500rpm)132kw      (power state 121kw/1500rpm)Rotating speed2300rpm2200rpmGeneratorRated power80KW100KWRated capacity100KVA125KVAOutput powderThree phase 380vThree phase 380vOperation SystemPressure flux25mpa/189L/min25mpa/189L/minTravelingIndoor hand&      Foot synchronization joy stickGeneratingIndoor position joy stickLiftingOutdoor joy stickTravelTravel speed      (front&reverse)2.8-4.6km/H      (two shift, continuously variable transmission)Grade ability30°30°Ground pressure33/25kpa   39/32kpa33/25kpa   39/32kpaChassisMinimum ground clearance490mm490mmTrack shoe width500mm/600mm500mm/600mmLifting craneTypeHydraulic360° swing      telescopic boomHydraulic360° swing      telescopic boomMax lifting capacity3200kg3200kgLifting radius2100-5320mm2100-5320mm