GD-3536A Automatic Cleveland Open-Cup Flash Point Tester
Introduction:
This instrument is designed and made as per GB/T3536-2008 Petroleum Products - Determination of Flash and Fire Points - Cleveland open cup method and ASTM D 92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester. It is applicable to all petroleum products with flash points above 79℃ and below 400℃ except fuel oils.
Features:
l This instrument adopts LCD screen to display and full English man-machine interface. It can preset expected flash point temperature, sample mark number, barometric pressure and other parameters.It has menu prompt and input guide.
l It adopts simulation tracking to display the function curve of temperature rising and test time. It has the functions of English mis-operation prompt,test date,test time and other parameters.
l Automatically calibrate the effect of atmospheric pressure to test and calculate the corrected value.
l Differential coefficient detection.Automatically correct the system deviation.
l Automatically open the lid,detect the flash point and print test data.The test arm automatically rise up and lower down.
l Reasonable design, safe and convenient to operate.
Specifications:
Power supply | AC220(-10%~+5%)V, 50Hz |
Flash point determination | Range:Ambient to 400℃ Repeatability:≤8℃ Reproducibility:≤17℃ Accuracy:0.1℃ |
Heating rate | Correspond with GB/T3536 and ASTM D92 |
Ignition mode | Electric ignition. Gas flame diameter is 3.2mm~4.8mm |
Ambient temperature | (10~40)℃ |
Relative humidity | ≤80% |
Maximum power consumption | 400W |
Dimension | 410*360*310mm |
