Description:
Baudcom provides 10Gbps Ethernet media converter between SFP+ to UTP,and XFP to UTP.No matter what kind of media applied for 10Gbps Ethernet,it used to be the fiber as the media for transmission.10G Ethernet standalone and module cards, brings you the best and simple solution for the Ethernet conversion between media of copper wire and fiber, with the speed of 10G.
The 10G Ethernet media converter's module card allows you to cascade multiple BD10 2U Rack (16 channel) chassis for managing at the same time.
With various Interface:
SFP+ to RJ45
XFP to RJ45
10G ethernet media converter SFP+ card 
10G ethernet media converter XFP card
Application:
1.Connection between fiber to copper 10Gbps Ethernet equipment function as fiber-to-copper media converter for long distance transmission
2.Media converter for network backbone(SAN, LAN, MAN)
3.Can be applied in Telecommunication room, R&D laboratory, Data center, and etc.
Features:
●Support Jumbo Frame
●Transparent Transport and very low delay
●Support ITUT prescribed DWDM/CWDM wavelength
●Support DMI function for SFP+/XFP fiber module
●Support Loopback test function
●Economic In-band Management function
●Powerful Network Management function(Web,SNMP,Console)
●Support hot plugging
●Support 2U Rack (16 channel) and standalone use
●Full State Led display
●Easy installation
●UTP cable length detection(only RJ45 interface)
●Providing protections against lighting and static electricity for Ethernet network and the network main system
Technical Specification:
Model | ||||
Module Card | BD-10G-SFP+ | BD-10G-XFP | ||
Interface | PortA | SFP+ | XFP | |
PortB | RJ45 | RJ45 | ||
Transmission Speed | 10Gbps | 10Gbps | ||
Data | Technical Indexes | |||
Protocol | IEEE802.3an(10Gbase- T),IEEE802.3ae(10Gbase- SR/LR/ER/ZR) | Access Type | 10G LAN | |
Transmission Distance | SFP+ module: Up to 80Km 10G base-T: 100meters Cat .6a cable | |||
Maximum Packet Forwarding Rate | 14,880,950/S | |||
Network management information:
| • Card type information • SFP+ or XFP fiber module detection • SFP+ or XFP fiber module DMI function(Temperature,Voltage,Optical power ) • Link status detector •Enable/Disabled Loopback test function • Enable/Disable PRBS Generator and checker function • Rate select ( 10Gbase-Lan or Wan ) • Remote card's status monitor(only in pairs )
| |||
Power requirement
| Rack-mountable : AC 85 ～ 220V OR DC -48V Standalone: AC 220V OR DC -48V Power consumption: ≤9W | |||
Work Environment | Operating Temp: 0~ 50 ℃ Storage Temp: -10~ 70 ℃ Humidity: 5%~90% ( non-condensing ) | |||
Dimension
| Card :11.5mm(W)×78mm(D) Standalone:156mm(W)×128mm(D)×32mm(H) | |||
.jpg)
