2 Inch Clamp Type Electromagnetic Flow Meter for Waster Water Field

Trade on HiSupplier, Worry Free Guarantee
Trading safety, secure your money, lower the risk, protect both buyers and suppliers
HiSupplier is a Chinese multinational company in U.S, it helps to coordination and order landing.
More ›
  • Product Details
  • Company Profile
  • Product Reviews

2 Inch Clamp Type Electromagnetic Flow Meter for

Waste Water Field
 
 


Application:

MTF electromagnetic flow meter is, a kind of
instrument,used for measuring the flow conductivity liquid,
which is widely used in flow measuring of Metallurgy, Chemical
industry, Paper industry, Environmental protection, Oil industry,
Textile industry, Food industry and City administration, Water
works,etc.

 


Instrument characteristics


1). No baffles and running part inside the measuring tube,
therefore no additional flow loss and no jams happen.
Especially for measuring the flow of solid-liquid object, for
example, sewage, mud pulp and CWS (coal water slurry).


2). Only liner and electrode have direct contact with the
measuring medium, by choosing correct liner and
electrode,,then the corrosion resistance and wear resistance
can be satisfied. Therefore it can be used in kinds of strong
acid and alkali in chemical solutions.


3). Easy for installation, 5D for front straight pipe, 2D for back
straight pipe(D means inner diameter of chosen instrument).
4).High accuracy, it is up to ±0.2%, it is capable for testing

forward/reverse Bi-directional flow.


5). Dual frequency excitation is adopted to avoid the affection
from public frequency.


6). Low consumption.


7). Good interchangeability of the converter, it is easy to have
the accuracy without remark the real flow.


8). Wide ranges.

 

 

 


Instrument detection and maintenance


Electromagnetic flow converter has self-diagnosis function. In addition to the power and hardware circuit fault, The system also give alarm to other faults in general usage. These information are given accordingly prompts in the lower right of the screen.


 

1, Maintenance and repair

 

a) Sensor installation site should be consistent with the section four requirements,

Please keep the housing clean and tidy

 

b)Transmitter should be placed in a clean, ventilated, dry place

c) Need to inspect every two years, for high precision users, instrument need to be submitted to censorship.

 

 
2, Transportation, storage
a) The instrument must be packed before transportation, be carefully handled when loading and unloading.

 

b) Storage site must be dry, ventilated, avoid corrosive gas erosion, the ambient temperature is not too low or too high.

 

c) Storage time better not exceed three years.

 

 
3, Unpacking and checking

a) The packing can’t be opened with heavy hammer, and should be careful not to damage the instrument

 

 


 

 

Data Sheet

 

MTF
Electromagnetic
flow meter

Divided type

Integrated 
type(IP67)

Explosion-
proof 
integrated

Battery
powered  
type

Heat(energy) type

Accuracy

±0.2%  or ±0.5%

Diameter

DN15~dn2400

DN15~DN600

DN25~DN1400

Flange

Comply with GB9119 Standard carbon steel(stainless steel is optional)

Pressure

DN15~DN1600 1.0,
1.6,2.5,4.0MPa 
DN700~DN2400 0.6,
1.0,1.6MPa

DN15~DN600 1.0,
1.6,2.5,4.0MPa

DN15~DN600 1.0,1.6,2.5,
4.0MPa DN700~DN2400 0.6,
1.0,1.6MPa

Please consult us if you need special pressure

Liner

PTFE,PU,CR,PFA,F46,IR

Conductivity

≥5μs/cm(Please consult us if it is less than ≥5μs/cm)

Electrode

316L,Hastelloy,Ti,Ta,PT-It

Protection Level

IP67(For
sensor, 
IP28 is 
optional)

IP67

IP67

IP68

IP67  IP68

Medium Temperature

-25~180
(Please 
refer to liner
 material)

-25~80(Please 
refer 
to liner material)

-25~180
(Please refer to
 liner material)

Influence of Ambient
 temperature

-25~60<±0.1%/10 or<±0.25%/10

Repetition

≤±0.1%,±0.25%

Analog output Error

≤±0.02mA

Current

≤20m/s

Electrical connection

M20*1.5seal,G1/2,NPT1/2

Output interface

Standard output(4~20mA),Pulse output,RS485,HART,Profibus-PA

 
 
 


Send message to this supplier
Mr. Miss. Angel
Tel: 86-25-53266120
Enter between 20 to 3,000 chatacters.
Contact Method
Nanjing Metlan Measurement Control Instrument Co., Ltd
No.12, Rungu Road, Guli Industrial Zone, Nanjing, Jiangsu, China (Mainland)
Didn't find what you're looking for? Post Buying Lead or contact our customer service specialist for help!
Buyer Help Center