2. Describtion
1. Suitable for all electrical equipments
2. Large display for more detailed content
3. CPU controlled; fast transfer time
4. Intelligent battery management, prolonging the service life of the battery
5. Complete protection function, high reliability
6. Can provide high current charge
7. Can match different types of batteries
8. Remote controller can make the operation in a distance of 15 meters
3. Parameters
| Generl specification | Power star | |||||
| Input wave form | Pure sine wave | |||||
| Nominal voltage | 120VAC | 230VAC | ||||
| Low voltage trip | 90v+/-4% | 184v/154v ±4% | ||||
| Low voltage re engage | 100v ± 4% | 194/164±4% | ||||
| High voltage trip | 140v±4% | 253v±4% | ||||
| High voltage re engage | 135v±4% | 243v±4% | ||||
| Max input AC voltage | 150VAC | 270VAC | ||||
| Nominal input frequecy | 50Hz or 60Hz(Auto select) | |||||
| Low freq trip: | 47Hz for 50Hz,57Hz for 60Hz | |||||
| High freq trip: | 55Hz for 50Hz,65Hz for 60Hz | |||||
| Output wave form : | Bypass mode.same as input | |||||
| Overload protection | Circuit breaker | |||||
| Short circuit protetion | Circuit breaker | |||||
| Transfer switch rating | 30amp or 40amp | |||||
| Efficiency on line transfer mode | 0.95 | |||||
| Line transfer time: | 10ms typical | |||||
| Bypass without battery connected | yes | |||||
| Max bypass current | 30amp or 40amp | |||||
| Bypass over load current | 35amp or 45amp:Alarm | |||||
| Inverter Specification/Output | ||||||
| Output wave form: | Pure sine wave | |||||
| Output continous power watts | 1000w 1500w 2000w 3000w 4000w 5000w 6000w | |||||
| Output continous power VA: | 1000w 1500w 2000w 3000w 4000w 5000w 6000w | |||||
| Power factor: | 0.9-1.0 | |||||
| Nominal output voltage rms | 120v/230v | |||||
| Output voltage regulation | +/-10%rms | |||||
| Output freqency | 50Hz ± 0.3Hz or 60Hz ±0.3Hz | |||||
| Nominal efficiency | >88% | |||||
| Surge ratings | 3000 4500 6000 9000 12000 15000 18000 | |||||
| Short circuit protection | Yes fault after 10secs | |||||
| Inverter Specification/Input | ||||||
| Nominal input voltage : | 12V | 24V | 48V | |||
| Minimum Start Voltage | 10V | 20V | 40V | |||
| Low battey alarm | 10.5V | 21V | 42V | |||
| Low battery trip | 10V | 20V | 40V | |||
| High voltage alarm | 16V | 32V | 64V | |||
| Power saver | Below 25w when enabled | |||||
| Power saver | Same switched on/off remote | |||||
| Charger Mode specification | ||||||
| Input voltage range: | 95V-127V,194V-243V,164V-243V | |||||
| Output voltage | Dependent on battery type | |||||
| Charge current | 35A/70A | |||||
| Battery initial voltage for start up | 0-15.7v for 12v(2 for 24v, 4 for 48v) | |||||
| Over charge protection shutdown: | 15.7v for 12v(2 for 24v, 4 for 48v) | |||||
| Charge curves(4 stage constant current) battery types | ||||||
| 4 Step digital controlled progressive charge | ||||||
| Battery type: | Fast V | Float(2 for 24v, 4for 48v) | ||||
| Gel U.S.A. | 14 | 13.7 | ||||
| A.G.M.1 | 14.1 | 13.7 | ||||
| A.G.M.2 | 14.6 | 13.7 | ||||
| Sealed Lead Acid | 14.4 | 13.6 | ||||
| Gel Euro | 14.4 | 13.8 | ||||
| Open Lead acid | 14.8 | 13.3 | ||||
| Calcium | 15.1 | 13.6 | ||||
| De-selphation | 15.5 for 4hrs | |||||
| Remote control/RS232/USB | Yes Optional | |||||
| Size: | 1000/2000/3000 | 442*218*179mm | ||||
| 4000/5000/6000 | 598*218*179mm | |||||
| Weight: | 1000 | 2000 | 3000 | 4000 | 5000 | 6000 |
| 18kg | 20kg | 22kg | 35kg | 38kg | 40kg | |
Jessie zhou
Shenzhen Heng Ye Da Elec. Co., Ltd.
ADD:NO. #301, BLDG 25 SHAHE INDUSTRIAL ZONE . BAISHIZHOU, NANSHAN DISTRICT.SHENZHEN CHINA
Code:518053
SKYPE:zhdj007
