MMO Mesh Ribbon Anode
Mixed Metal Oxide (MMO) Mesh is a durable anode designed for ImpressedCurrent Cathodic Protection systems of rebar embeded in concret or motar, especially in hot and saline conditions.MMO titanium ribbon anodes are typically installed into slots cut in the concrete surface while MMO titanium mesh anodes are attached to the concrete surface then covered with shotcrete or a concrete overlay.
1. Substrate & Coating
Titanium ASTM B265 Grade 1
1)Composition
C | max 0.08% |
N | max 0.03% |
H | max 0.015% |
Fe | max 0.20% |
O | max 0.18% |
Residual | max each 0.1% |
Residual | max total 0.4% |
Ti | balance |
2)Coating: Mixed Metal Oxide-IrO2+Ta2O5
2.Parameters:
1)Other specification can be availableas client's requirement.
width (mm) | length (m) | thickness (mm) | Current Rating | surface area (m2) | mesh dimension (mm) |
10 | 76 | 1.3 | 2.8ma/m | 1.85 | 2.5x4.6 x0.6 |
13 | 76 | 1.3 | 3.5ma/m | 2.4 | 2.5x4.6 x0.6 |
19 | 76 | 1.3 | 5.28ma/m | 3.6 | 2.5x4.6 x0.6 |
1220 | 76 | 1.98 | 37.8ma/m2 | 92.9 | 25x50 x0.89 |
1220 | 76 | 1.98 | 24.4ma/m2 | 92.9 | 34x76x0.89 |
2) Anode Performance:
Current Rating at 100 mA/m2(10mA/ft2) | 2.8mA/m(0.085mA/ft) |
Expected life(NACE Standard TM02944-94) | 100years |
Catalyst | Mixed Metal Oxide(MMO) |
Maximum anode concrete interface current density: | |
FHWA limit | 110mA/m2(10mA/ft2) |
Short-term limit | 220mA/m2(20mA/ft2) |
3.Application
Reinforced concrete, Bridge,Pier etc.
4. The Third Party Certificate
Test Cetificates from Det Norske Veritas (U.S.A.), Inc. Under NACE TM0294-2007
Production Assessment from Bureau Veritas
5. Quality Assurance
1) Raw materials chemical Composition- ASTM B265 Gr1
2) Visual Inspect Coating Uniformity, Color and Scratch
3) Coating adhesion
Three Steps
First, feeling the surface of tubular anodes in a pair of white gloves to observe
whether black mark is left on the gloves
Second, paste with transparent tape to observe whether black mark is left on the
Tape
Third, bend the ribbon to observe whether the coating fades
4)Accelerate Life Test
NACE standard TM0108-2008, 15000A/m2, 1mol/l Na2SO4
6. Our ISO 9000 Quality Certificate
7. Products Catalogue
Anodes Impressed Current for Cathodic Protection
Titanium Anodes
1) Mixed Metal Oxide Ti Wire & Piggy Back Wire Anode
2) Mixed Metal Oxide Ti Ribbon & Mesh Ribbon Anode
3) MMO/Platinized Ti Tubular & Anode string &Canister Anode
4) MMO/Platinized Ti Rod & Probe Anode
5) MMO/Platinized Ti Discrete Anode
6) MMO/Platinized Ti Disk & Sheet & Plate Anode
High Silicon Cast Iron Anode
1)HSCI Rod Anode
2) HSCI Rod Anode
3) HSCI Tubular Anode
Cathodic Protection Materials
1) CP Wire and Cable
2) Anode Calcined Petroleum Coke Backfill
Galvanic Anode
Magnesium anode
1) MG High Potential Anode
2) H-1 Alloy Mg Anode
3) Pre-packaged Mg Anode
4) Cast Mg Rod AZ-63 Alloy
5) Mg Extruded Rod /Ribbon Anode
Aluminum anode
1)Aluminum Cast Anode
2) Aluminum Extruded Rod Anode
Zinc Anode
1) Zinc Cast Anode
2) Zinc Ribbon anode
Titanium Anodes Used in Other Field
1) Mixed Metal Oxide Titanium Anode for Hydrometallurgy
2) Mixed Metal Oxide Titanium Anode for Electrolysing Copper/ Aluminum Foil
3) Mixed Metal Oxide/Platinized Titanium Anode for Sodium Hypochlorite and
Seawater Electrolysis
Titanium Product
1) Titanium Clad Copper Metal Material
2) Titanium Art Products
3) Titanium Fasteners
4) Titanium Material
8. Products
Raw Materials
Half-finishedProducts
Finished Items
Packages
