Advanced features.
Wire mesh belt continuous flow shot blasting machine is suitable for flat workpieces and large and complex parts of a complete particularly, comprehensive and continuous blasting processing.This shot blasting machine configuring the 4-8 high-power "HS400" Shot blast wheel around the wheel and fixed to the chassis (respectively vertical and horizontal tilt arrangement),so that it can handle very complex, with a "pocket" or pellets are hard to reach areas of the workpiece.It can adjust its tension to achieve transmission parts. Special belt guide so that the following shot blasting wheel can only be processed by a shot blasting a belt position, which means that any untreated surface of the workpiece will be reduced to a minimum.
(Composition and structure characteristics of equipment)
Mainly constituded by the cleaning chamber, shot blasting, hoist, part of the screw blower, separation system, mesh belt systems, electrical systems, etc.
The work principle:
Workpiece on the belt by the continuous operation while blasting projectiles thrown high speed fan-shaped beam evenly against the surface of the workpiece, so as to achieve the purpose of cleaning up.Projectiles thrown through the circulatory system recycling use. Dusty gas from the fan to suck in dust filtration, become to clean air into the atmosphere.
Technique Parameter
| Name | Continuous flow shot blasting machine | |||
| Mode | WD06 | WD08 | WD10 | WD12 |
| Wide of mesh belt(mm) | 600 | 800 | 1000 | 1200 |
| Blast wheel quantity | 4 | 4 | 8 | 8 |
| Blast whhel power(kw) | 11-15 | 11-15 | 11-18.5 | 11-18.5 |
High wear-resistant metal mesh may adjust its tension to achieve transmission parts
Multiple directions shot blast cleaning , hub-type polishing head maximize blasting efficiency,
Avoid colliding with each other between the parts damaged parts of the surface.
Contact us for more information!
