Home > Electronic & Electrical > Wires, Cables & Cable Assemblies > Power Cables > 200L Half Pipe Jacketed Vessel glass lined Carbon Steel Reactor Chemical

[Province: Jiangsu ]   
Contact Method
200L Half Pipe Jacketed Vessel glass lined Carbon Steel Reactor Chemical
Share |

200L Half Pipe Jacketed Vessel glass lined Carbon Steel Reactor Chemical

HiSupplier Escrow
Trade on HiSupplier, Worry Free Guarantee
•Trading safety, secure your money, lower the risk, protect both buyers and suppliers
•HiSupplier is a Chinese multinational company in U.S, it helps to coordination and order landing.
More ›
  • Product Details
  • Company Profile
  • Product Reviews

 
 
 
200L Half Pipe-coiled pipe glass lined reactor , Vertical type high pressure vessel
 
 
Installation,Operation,and Storage of Glass Lined Equipment

  1. Installation of Glass Lined Equipment
  1. Transprot

It is only allowed to exert force on the tank luds when transporting the unpackaged glass lined euqipment.Make sure the coupler,clamps and other wearing parts are under no stress.Rolling the equipment or moving it with a crowbar is not permitted.Aviod shock and collision.

  1. Hoisting

When hoisting the glass lined equipment,the wire rope must be hitched to the specified position like the jacket nozzle,tank lug,etc.(Note that the rings on the tank lid are only for lifting the lid.)Smoothly lift and gently put down the equipment,making
Sure the equipment does not collide with any objects.

  1. Check before Assembly

Before assembly,the checker should wear clean,soft-sloed shoes and enter the tank to check whether the glass lining is intact.

  1. Flange Mounting

Gradually tighten the flange bolts in pairs and along the diagonal with uniform force.Do not screw up the bolts all at once.so as to prevent the glass lining from being damaged by uneven force.

  1. Clamp Installation

Before installing the clamps,check if the clamps are intact and the quantity meets the requirement.During installation,make sure the distance between clamps is equal and the tightness degree is appropriate,so as to ensure safe running and reliable sealing.

  1. Agitator Installation
  1. Firstly,put the agitator into the tank,the bottom of which is laid with a soft mat.Then,lift the tank lid to a predetermined position and mount the seal on the agitator shaft.Subsequently,lift the agitator;connect it to the ourput shaft of reducer,and lock them with check nut and check bolt.
  2. Adjust the concentricity and perpendicularity of the agitator shaft and seal according to technical specifications.Then,make the agitator shaft rotate slowly.Only when the shaft rotates smoothly with no anomalies can be notor button be opened.
  1. Gasket selection

The gasket must be selected according to the type,concentration,and temperature of medium.Its properties and application method should meet process requirements.Currently,our company offers the following gaskets for you to choose from.

  1. PTFE wrapped asbestos gasket
  2. PTFE wrapped absestos gasket with corrugated stainless steel
  3. PTFE wrapped non-asbestos gasket with corrugated stainless steel
  4. PTFE wrapped rubber gasket
  1. Welding
    1. Welding on the outside surface of glass lined tank is prohibited.
    2. For welding nozzles,lugs and supports,please use electrci welding and take cooling measures.Do NOT use gas welding.
    3. When welding near the glass lining,please cover the glass lining and nozzles to prevent the glass lining being damaged by the splashing welding slag.
    4. Operation of Glass Lined Equipment

During the use of glass lined equipment,please pay attention to the following.

  1. Prevent any metal or hard objects falling into the glass lined vessel to damage the glass lining.
  2. Aviod feeding hot materials to cold tank or cold materials to hot tank,as the sudden change in temperature will produce internal stress which affects the service life of glass lined tank.
  3. When operating the jacketed glass lined equipment,you should make sure that pressurizing and heating are conducted slowly.Generally,inject steam with the gage pressure of 0.1MPa into the tank and maintain this pressure for 15 minutes.Then,gradually increase the pressure and temperature until the operating pressure of the tank is reached.it is appropriate to increase the pressure at the speed of 0.1MPa per 10 minutes.

Both heating and cooling should be performed within the allowable temperature range.For our glass lined equipment,the operating is 0 to 200.The permitted thermal shock is 120 and cold shock is 110.if the equipment is supposed to use outside the above-mentioned temperature range,customers should specify this in the order contract,and we can design and manufacture the equipment meeting customer requirements.
4. During use,prevent acid entering the jacket,This is to avoid the glass lining explosion caused by the reaction of hydrogen and metal in the glass lining.
5. During discharging,if the discharge valve or pipe is blocked,use a nonmetallic tool to gently poke the valve or pipe.DO NOT knock.
6.Do Not use hardware to clean the tank interior,The materials adhered on the internal surface of the tank must be cleaned timely and thoroughly.
 
III.Storage of Glass Lined Equipment
The glass lined equipment should be stored in the warehouse,If it is placed outdoors,there should be anti-rain measure.In cold areas,water inside the tank,jacket,and tubes must be cleared before winter,so as to avoid glass lining damage caused by frcczing and expansion.During storage,prevent hard objects rubbing,impacting,or colliding with the glass lined equipment.
 
 
Viscosity Table of Common Materials
Viscosity refers to the flowing or non-flowing property of a substance.Any fluid has a viscosity,The viscosity of a fluid is a measure of its resistance to shear forces.It is reflected in the initial and continuing flowing stages.For example,the fluid of high viscosity needs more power to flow than the one of low viscosity.Fluid viscosity is related to temperature.
Common measurement units of viscosity are polse(P),centipoise(cP),and pascal-second(Pa·s),The conversion between these units is as follows
1P=100cP, 1cP=1 m Pa·s, 1000MPa·s=1 Pa·s
With the viscoity of 1 cP,water flows easily,The viscosity of common substances is listed below.
Water: 1 cP
Milk: 3 cP
Vegetable oil: 34 cP
Tomato sauce: 176 cP
Glycerin: 880 cP
Molasses: 1760 cP
Glue: 3000 cP
Syrup: 8846 cP
Sour cream: 15200cP


 

Description:
 
The Half pipe -coiled glass lined reactor enjoys wide applications in the dye, food ,pesticide, chemical ,petrochemical, pharmaceutical and other industries..Jiangsu Gongtang provides you with excellent half pipe-coiled Glass lined reactor.
The Contrast of half pipe-coiled Glass lined reactor and out jacket glass lined reactor:

  1. Vessel type and Safety: half pipe-coiled Glass lined reactor is belong to stationary heating or cooling operation, For the safety, half pipe-coiled Glass lined reactor is more safer.
  2. The effect of heat transfer: Although the heat exchange area of outside half pipe-coiled pipe is 1/3 smaller than the outside jacket. The flow rate is 2 to 3 times quicker than the outside jacket, in fact, improve the effect of heat transfer. The outside jacket have some problem such as the heat transferring medium is easy to form disturbance flow, short circuit, non uniform heat exchange and so on. However, outside half pipe-coiled pipe do not have these faults. So, for the liquid heat and cold medium, The effect of heat transfer of outside half pipe-coiled pipes is more remarkable. In addition, for the steam heat style, considering the influence of pipe group, the outside jacket is better.
  3. Stiffness : half pipe-coiled pipes strengthen the stiffness of the reactor, outer half coil belongs to open type heating transfer method with high speed flow, reducing the outer pressure for the inner jacket body, increasing the stiffness of reactor actually.
  4. The contrast of corrosion resistance: while using the cooling water, the corrosion can be easily formed under the ion erosion of ion H+,CL-,which will lead the solution precipitation and corrosion when we are in the condition of using out jacket type; If we use the half pipe-coiled pipes, the precipitation will not easily formed with the help of high speed flow with the upper-lower path. Of course, the pipe wall will not be corroded.

 
 
 
Competitive Advantage:
 
With the development of these days our second new factory which produced exportd products has been used,by using BAO STEEL and Germany Wendel enamel,our products have very good quality with the best cost performance .In the new factory,we use vertical 50000L electric furnace to enamelling buring the products by using the computer to control which make the products buring in a very good condition


 
 
 

Main dimension of Half pipe -coiled Glass lined Reactor

Volume 300 500
Send message to this supplier
Mr. Mr. Jeffery
Tel: 86-523-89110022
Enter between 20 to 3,000 chatacters.
Contact Method
Jiangsu Gongtang Chemical Equipments Co., Ltd.
No.1 WeiLiu Road, Yupo Road,Chengbei Industrial Park, Taizhou, Jiangsu, China (Mainland)
Related Keyword(s): Jacketed Glass Reactor Glass Lined Reactor Glass Lined Vessel Lined Steel Pipe Plastic Lined Steel Pipe View all Glass Reactor Carbon Steel Pipe Carbon Steel Seamless Pipe Seamless Carbon Steel Pipe Carbon Seamless Steel Pipe View less
Related Catalog(s): Power Cables Electric Power Tools Connectors & Terminals Auto Repair Equipment & Tools Surveillance Equipment
Didn't find what you're looking for? Post Buying Lead or contact our customer service specialist for help!
Buyer Help Center