Loop tack tester is used for adhesive, tape and label in the measurement of their sticking force, adhesiveness and tack, etc.
It complies with the following test methods:
FINAT(FINAT Test Method No. 9: Loop tack measurement)
PSTC-16 Loop tack
ASTM D6195 standard test methods for Loop Tack
Loop tack tester Principle
A strip sample of 25mm wide and 175mm long is formed into a loop and brought into contact with a glass plate at 300mm/min. Immediately after the contact, the loop is withdrawn at 300mm/min and the maximum force to separate the loop from the glass plate is recorded, which is referred to as loop tack.
Loop tack tester Technical features
● 7 inch TFT touch screen operation (human machine interface)
● PLC control unit is equipped for stable performance
● Precision ball screw for accurate speed & displacement.
● Test speed is adjustable.
● Dual movement
● Limiting device and automatic returning
● Microprinter
Loop tack tester Parameters
Test Range 200N ( or other range)
Speed Range 1-500 mm/m
Stroke 350mm
Dimension (mm) 400(L)×340(W)×800(H)
Sample Size 125mm*25mm
Test Plate Size 150mm*25mm
Power AC 220V 50Hz
