MAG ALPG type Aluminium PG connectors Extrud type
Description :
These connectors use for aluminium or steel to aluminium connection, where no mechanical tension is involved.
The SL type was basic type, and PGS and PGT type withthe teeth groove ,so it can grip the conduct without stripping conductor's insulating cover.
The patented lower section of the body protects the bolts from corrosion and makes the tightening of the bolts easy with wrench.
The correct tightening torque is essential to the connection.
The connectors are made of corrosion-resistant aluminium alloy;
The 8.8 bolts are dacromet. All connectors is equipped with springs to make the installation even easier.
Material:
Body/ Plate:High strength, corrosion resistant aluminium-alloy
Bolts: DIN 933, steel 8.8, Dacromatized
Nuts: DIN 934, steel, Dacromatized
Surface: uncoated
|
Conductor Cross Section sq.mm |
Conductor Diameter φmm |
| AL | AL |
| 6-25 | 2.7-5.3 |
| 16-40 | 5.1-8.0 |
| 16-70 | 5.1-11.7 |
| 35-95 | 7.5-12.5 |
| 40-120 | 8.0-14.0 |
| 70-240 | 11.7-20.3 |
2.PGS TYPE
| Part NO. |
Main Conductor AL mm2 |
Branch Conductor AL mm2 |
Tightening torque Nm |
| PGS | 16-120 | 16-120 | 2*M8 |
3.PGT TYPE
| Part NO. |
Main Conductor AL mm2 |
Branch Conductor AL mm2 |
Tightening torque Nm |
| PGT | 16-120 | 16-120 | 2*M8 |
4.V Type
|
Conductor Cross Section sq.mm |
Conductor Diameter φmm |
| 16-25 | 5.1-6.3 |
| 35-50 | 7.5-9.0 |
| 50-100 | 7.5-14.0 |
| 100-150 | 13.0-15.70 |
