LB-PT60B HDMI USB Co2 Laser Stripping Machine Copper Wire Electrical Scrap Wire
Brief introduction:
The machine is used in non-mental materials, such as Polyvinyl Chloride, Glass Fiber, Polyester, Polyester Film, Nylon, Polyethylene,Fluoride, Silicon Resin, and etc.
It is especially used to cutting off the Aluminum Foil, Mylar and plastic foil on HDMI, USB, DVI, DP, SATA, and SFP.
Product display
Laser stripping machine technical parameters
| Working Line Width | 300m |
| Laser media | Co2 Laser Glass Tube |
| Laser Power | 60w x 2 |
| Location Accuracy | ±0.02mm |
| Max Wire Stripping Speed | 6000mm/min |
| Power Supply | Single phase AC220V/5HZ |
| Working table | Module transmission Platform |
| Power consumption | ≤1.5kw |
| Water way | Water cooling |
| Control System | PLC (Programmable Logic Controller) |
| Dynamic Focusing Device | Yes |
| Machine weight | 140kg |
| Machine dimension | 1700x600x1320mm |
Standard Accessories
Manufacturing process
 |
| Inside of the laser stripping machine |
 |
| Overlook of the inside of the laser stripping machine |
 |
| Laser stripping line |
 |
| Laser stripping machine can cut off the AL foil, Mylar and PE insulation without causing any harm to the metal |
 |
 |
Samples of laser stripping machine
 |
| Our laser stripping machine can strip 10000 pcs of this wire per hour |
 |
Feateures
1.It utilizes a single Fibre-optic/ twin beam path design
2.Professional for 52 AWG under very fine coaxial line and aluminum mylar foil.
3.It utilizes an imported laser device,the service life is 6 times greater than domestic laser devices.
package
Packing dimension: 1700x600x1320mm
Volume: 3.11CBM
Gross weight: 140kg
