Car Paint Equipment Infrared Spray Booth Centrifugal Fan Heating Separate Control
Features
1. Infrared spray booth , don’t need a diesel as fuel ,only environmental infrared lamps for heating.
2. All panels are tongue and groove interlock structure
3. 10 units short wave infrared lamps for heating
4. Quality brand-name centrifugal fans
5. Industry-leading light levels
6. Spray booth specific, dual voltage LED light fixtures
7. Booths include installation instructions, fan, motor and drive, fasteners, hardware, and sealant necessary for assembly
8. Infrared fixed on wall, separate control, energy save.
Advantage
In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean,
symmetrical and steady-going down airflow for spraying,After painting, the infrared heating separate control to dry the item, until the temperature up to setting valve. Afterwards, the air with little benzene will be released to the atmosphere after being filtered by the air filter.
| Item | Detailed Specification |
| Inside dimension | 6900×3900×2650 mm (L×W×H) |
| Outside dimension | 7000×5350×3400mm (L×W×H) |
| Front door | Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, orange colour, door head and two batten on both sides white colour. |
| Emergency door | 1 units, 650×1800mm (W×H), colour: white. |
| Basement | Galvanized steel assemble, 300mm high, galvanized steel bending support, 2 rows grilles made by flat bar and twisted steel, silver, 3 rows indented plate, silver colour, 2 ramps, 520×2000mm/pc, silver colour. |
| Wall panel | Thickness: 50mm, width:1150mm, tongue and groove structure, 0.376mm colour steel with EPS inside, colour: white. |
| Light | Ceiling Lights: 8Units×4Pcs=32Pcs×36W, no side lights, with LED, lighting boxes are powered coated. |
| Generator cabinet | Intake from side upper, exhaust from rear upper, galvanized steel frame; orange machine-made panel covered, filled with heat preservation material inside. |
| Intake and Exhaust system | Inlet: 2×3KW centrifugal fan, model: YDW4.5M1, air capacity for each fan: 10500m3/h. |
| Outlet: optional, 4m ducts, 1 pcs 900 bend. | |
| Heating system | 10 sets infrared heating, with magnetism sensor, 3PCS/set, 1KW/PCS, halogen tube, total power: 30KW, max temperature 80. |
| Purification system | Pre-filter, ceiling filter, fibreglass filter. |
| Roof | Galvanized steel |
| Control box | Spraying, baking, time setting, lighting switch, thermostat, power supply switch, emergency stop, all motors is normal start. |
| Total power | 38KW (Power supply 1×220V, 3×380V, 50HZ) |
