Paint Prep Station Car Paint Booth Energy Saving High Illumination
Features
1, Spray booth: 7.5KW turbo fan for intake, 7.5KW turbo fan for extraction.
2, Prep station: 5.5KW turbo fan for intake and exhaust.
3. Spray booth with full grilles.
4, Spray booth with side light.
5, All LED lights, energy save and more illumination.
6, Color white, blue, orange and red is optional.
7, Down draft and rear side draft.
Advantage:
Special for the bodyshop, continue line if needed, air flow from back side, intake and suction units from complete basement, down draft, two units side by side, option for the electric shutter door between two booth, and rail on the floor, car moveable from one booth to another. Specification as below for one unit only.
Spray booth:
| Item | Detailed Specification |
| Inside dimension | 6900×3900×2650 mm (L×W×H) |
| Outside dimension | 7000×5300×3400mm (L×W×H) |
| Front door | Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, blue colour, door head and two batten on both sides white colour. |
| Emergency door | 1 units, 650×1800mm (W×H), colour: white. |
| Basement | Galvanized steel assemble, 300mm high, quadrate steel support, full grilles made by flat bar and twisted steel. |
| Wall panel | Thickness: 50mm, width:1150mm, tongue and groove structure, 0.376mm colour steel with EPS inside, colour: white. |
| Light | Ceiling Lights: 8Units×4Pcs=32Pcs×16W, side lights: 8Units×2Pcs=16Pcs×7W, with LED, lighting boxes are powered coated, illumination ≥1000LUX |
| Generator cabinet | Intake from side upper, exhaust from rear upper, galvanized steel frame; blue machine-made panel covered, filled with heat preservation material inside. |
| Intake and Exhaust system | Inlet:1×7.5KW turbo fan, air capacity for each fan: 25000m3/h. |
| Outlet: 1×7.5KW turbo fan, air capacity for each fan: 25000m3/h. Manual damper, 4m ducts, 1 pcs 900 bend, 1 pcs 300 bend. | |
| Heating system | Riello diesel burner G20, stainless steel heat exchanger, pneumatic damper for baking circulation, heating productive 200000kcal/h. |
| Purification system | Pre-filter, ceiling filter, fibreglass filter, activated carbon filter. |
| Roof | Galvanized steel |
| Control system | Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, temperature controller, power supply switch, emergency stop, hour meter, temperature limiter, all motors is normal start. |
| Total power | 17KW (Power supply 1×220V, 3×380V, 50HZ) |
Prep station:
| Item | Detailed Specification |
| Inside dimension | 6300×3450×2650 mm (L×W×H) |
| Outside dimension | 7550×3550×3100mm (L×W×H) |
| Plenum dimension | 6300×3450×450 mm (L×W×H) |
| Room body | Back side EPS wall panel, the other sides PVC curtain. |
| Light | Ceiling Lights: 8Units×4Pcs=32Pcs×36W, with LED, lighting boxes are powered coated. |
| Generator cabinet | Exhaust from back side, galvanized steel frame; white machine-made panel covered, filled with heat preservation material inside. |
| Intake and Exhaust system | 1×5.5KW turbo fan, air capacity: 18000m3/h, with electric damper. |
| Purification system | Pre-filter, ceiling filter, fibreglass filter. |
| Roof | Galvanized steel |
| Control system | Fan switch, lighting switch, emergency stop. |
| Installs way | Supported by steel column. |
| Total power | 6.7KW (Power supply 1×220V, 3×380V, 50HZ) |
