shear beam load cell/Elevator and Lift Load Cell LAG-D

Xiamen Loadcell Technology Co.,Ltd is one of the best elevator and lift load cell lag-d manufacturers and suppliers in China, welcome to buy cheap and high-quality elevator and lift load cell lag-d OIML and NIEP from us.FeaturesSingle-ended shear beamcapacity:800kgaccuracy:0.2%R.O.aluminum construction with surface anodizedoutput adjustment for parallel usingenvironment protection class:IP66Applicationstank and hopper scalesfloor scalesplatform scaleselevator and liftDescriptionBased on LCT advanced metal foil strain gauge technology,single-ended shear beam load cells are made in low profile.Theses load cells are of good side load resistance and relatively insensitive to the point of loading. Advantages of LCT Single-ended shear beam load cells:Quick to install thanks to off-center load compensation at the factory (per OIML R60),one unit or 4-matched units to build up a scale.With LCT leading technology in laser welding,shear beam load cells can be made to a higher protection grade of IP67.Model LAG-D load cells are designed to this “Single-ended shear beam” type and manufactured from high quality aluminum alloy of aviation standard. LAG-D load cells can be used to measure loads 800kg with the measuring accuracy of 0.2% R.O.( R.O.=Rated Output) and 2mV/V output signal.LAG-D load cells are mainly used for tank and hopper scales weighing systems,platform scales,floor scales,elevators and lifts.DimensionElectrical ConnectionTechnical DataShear beam load cells　LAG-D　Rated Capacity800kgExcitation,Recommended5－12VDCAccuracy ClassXExcitation,Maximum 18VDCRated Output 2.0±0.2%mV/VOperating Temp.Range-20－+60℃ Zero Balance±2%R.O.Safe Overload150%R.C.Input Resistance395±10ΩUltimate Overload200%R.C.Output Resistance350±5ΩInsulation Resistance≥2000MΩ(50VDC)  Cable,Lengthø5mm×5m *Linearlty Error±0.2%R.O.Protection ClassIP66 Repeatability Error±0.2%R.O. 　Hysteresis Error±0.2%R.O.  Creep in 30 Min.±0.2%R.O.  Temp.Effect on Output±0.2%R.O./10℃  Temp.Effect on Zero±0.2%R.O./10℃  Compensated Temp.Range-10－+40℃