LED Light Components 0805 Package Super Amber Chip LED 605nm Peak Emission Wavelength
SMD LED Light Components
Features:
- Package in 8mm tape on 7″ diameter reel.
- 1.60mm×1.50mm SMT LED, 0.75mm thickness.
- Low power consumption.
- Compatible with automatic placement equipment.
- Compatible with infrared and vapor phase reflow solder process.
- Bi-color (Multi-color) type.
- Colors: Hyper Red & Super Yellow Green.
- The product itself will remain within RoHS compliant Version.
Descriptions:
- The 0805 SMD LED is much smaller than lead frame type components, thus enable smaller higher packing density, reduced storage space and finally smaller equipment to be obtained.
- Besides, light Weight makes them ideal for miniature applications, etc.
- The series is specially designed for applications requiring higher brightness.
- The SMD LEDs are available with different colors, intensities.
Applications:
- Automotive: Backlighting in dashboard and switch.
- Telecommunication: Indicator and backlighting in telephone and fax.
- Flat backlight for LCD, switch and symbol.
- Circuit board.
- Status indicators.
- Commercial use.
- Advertising Signs.
- Computer.
- TV set.
- Monitor.
- General use.
| Part No. | Chip Material | Lens Color | Source Color |
| DL-PCB0805UAC-1UA120 | AlGaInP | Water Clear | Super Amber |
Absolute Maximum Ratings at Ta=25
| Parameters | Symbol | Max. | Unit |
| Power Dissipation | PD | 75 | mW |
|
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) |
IFP | 100 | mA |
| Continuous Forward Current | IF | 25 | mA |
| Reverse Voltage | VR | 5 | V |
| Operating Temperature Range | Topr | -40 to +80 | |
| Storage Temperature Range | Tstg | -40 to +85 | |
| Soldering Temperature | Tsld | 260 for 5 Seconds | |
Electrical Optical Characteristics at Ta=25
| Parameters | Symbol | Min. | Typ. | Max. | Unit | Test Condition |
| Luminous Intensity * | IV | 25 | 40 | --- | mcd | IF=20mA (Note 1) |
| Viewing Angle * | 2θ1/2 | --- | 120 | --- | Deg | IF=20mA (Note 2) |
| Peak Emission Wavelength | λp | --- | 610 | --- | nm | IF=20mA |
| Dominant Wavelength | λd | --- | 605 | --- | nm | IF=20mA (Note 3) |
| Spectral Line Half-Width | λ | --- | 35 | --- | nm | IF=20mA |
| Forward Voltage | VF | 1.80 | 2.20 | 2.80 | V | IF=20mA |
| Reverse Current | IR | --- | --- | 10 | µA | VR=5V |
Notes:
- Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
- The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
SMD LED Light Components Package Dimension:
