Subminiature Axial Flat Top View Blue Chip LED
Technical Data Sheet
Features:
- Surface-mount plastic package.
- High sensitivity (λp=470nm).
- Good stable analog output with temperature shift.
- Size: 3.20mm (L) ×2.70mm (W) ×1.10mm (H).
- Operating temperature performance, -40 to 85.
- Active area: 1.80mm2.
- Package in 8mm tape on 7” diameter reel.
- Compatible with automatic placement equipment.
- Compatible with infrared and vapor phase reflow solder process.
- Mono-color type.
- The product itself will remain within RoHS compliant Version.
Descriptions:
- The SMD series color sensor device is one channel Si photodiode sensitivity to Red, Green and Blue region spectrum in miniature SMD package. The color sensor series product is the good effective and low cost solution to white color balance, color detection and color management applications.
Applications:
- olor adjustment for LED back light system.
- Color adjustment for LED projector.
- Color detection.
- White balance adjustment.
- Consumer and mobile appliances.
| Part No. | Chip Material | Lens Color | Source Color |
| DL-R18BC-TR2 | InGaN | Blue Diffused |
Blue |
Absolute Maximum Ratings at Ta=25
| Parameters | Symbol | Max | Unit |
| Power Dissipation | PD | 95 | mW |
|
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) |
IFP | 100 | mA |
| Continuous Forward Current | IF | 25 | mA |
| Reverse Voltage | VR | 5 | V |
| Electrostatic Discharge (HBM) | ESD | 400 | V |
| Operating Temperature Range | Topr | -40 to +80 | |
| Storage Temperature Range | Tstg | -40 to +85 | |
| Soldering Temperature | Tsld | 260 for 5 Seconds | |
Electrical Optical Characteristics at Ta=25
| Parameters | Symbol | Min. | Typ. | Max. | Unit | Test Condition |
| Luminous Intensity * | IV | 45 | 80 | --- | mcd | IF=20mA (Note 1) |
| Viewing Angle * | 2θ1/2 | --- | 140 | --- | Deg | IF=20mA (Note 2) |
| Peak Emission Wavelength | λp | --- | 468 | --- | nm | IF=20mA |
| Dominant Wavelength | λd | --- | 470 | --- | nm | IF=20mA (Note 3) |
| Spectral Line Half-Width | λ | --- | 25 | --- | nm | IF=20mA |
| Forward Voltage | VF | 2.80 | 3.40 | 3.80 | V | IF=20mA |
| Reverse Current | IR | --- | --- | 10 | µA | VR=5V |
Notes:
1. Luminous Intensity Measurement allowance is ± 10%.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
LED Emitting Diodes Package Dimension:
