Infrared Remote-control Receiver Technical Data Sheet
Features:
- Photo detector and preamplifier in one package.
- Photodiode with integrated circuit.
- Internal filter for PCM frequency.
- Improved shielding against electrical field disturbance.
- High protection ability against EMI.
- High immunity against ambient light.
- High sensitivity.
- Low voltage and low power consumption.
- Long reception distance.
- Circular lens to improve the receive characteristic.
- TTL and CMOS compatibility.
- Output active low.
- Line-up for various center carrier frequencies.
- The product itself will remain within RoHS compliant version.
Descriptions:
- he M15B8 series are miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. The benefit is the reliable function even in disturbed ambient and the protection against uncontrolled output pulses.
- The M15B8 series is the standard IR remote control receiver series, supporting all major transmission codes.
Applications:
- ptical switch.
- Light detecting portion of remote control.
- AV instruments such as Audio, TV, VCR, CD, MD, etc.
- Home appliances such as Air-conditioner, Fan, etc.
- The other equipments with wireless remote control.
- CATV set top boxes.
- Multi-media Equipment.
Part No. | Material | Color | Source Color | |
DL-PC817 | Chip | Silicon | --- | Infrared Receiver |
Lead Frame | SPCC | Silver White | --- | |
Compound | Epoxy | Black | --- |
Absolute Maximum Ratings at Ta=25
Parameters | Symbol | Ratings | Unit | |
Input | Power Dissipation at (or below) 25 Free Air Temperature | PD | 70 | mW |
Reverse Voltage | VR | 6 | V | |
Forward Current | IF | 50 | mA | |
Peak Forward Current (*1) | IFP | 1.00 | A | |
Output | Collector Power Dissipation | PC | 150 | mW |
Collector Current | IC | 50 | mA | |
Collector-Emitter Voltage | BVCEO | 35 | V | |
Emitter-Collector Voltage | BVECO | 6 | V | |
Isolation Voltage(*2) | Viso | 5,000 | Vrms | |
Rated impulse isolation voltage | VIOTM | 6,000 | V | |
Rated repetitive peak isolation voltage | VIORM | 630 | V | |
Operating Temperature | Topr | -40~+85 | ||
Storage Temperature | Tstg | -55~+125 | ||
Lead Soldering Temperature | Tsol | 260 for 10 Seconds |
*1: Pulse Width=100μs, Duty Cycle=1%.
*2: For 10 Seconds.
*3: AC For 1 minute, R.H.=40%~60%
Isolation voltage shall be measured using the following method.
(1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side.
(2) The isolation voltage tester with zero-cross circuit shall be used.
(3) The waveform of applied voltage shall be a sine wave.
Electrical Optical Characteristics (Ta=25)
Parameters | Symbol | Min. | Typ. | Max. | Unit | Test condition | |
Input | Forward Voltage | VF | --- | 1.20 | 1.50 | V | IF=20mA |
Reverse Current | IR | --- | --- | 10 | µA | VR=4V | |
Terminal Capacitance | Ct | --- | 30 | 250 | pF | V=0V, f=1KHz | |
Output | Collector Dark Current | ICEO | --- | --- | 100 |
Didn't find what you're looking for?
Post Buying Lead or
contact our customer service specialist for help!
|