Steel cut anchor is a kind of concrete mechanical expansion anchors with internal thread and compose of a hollow anchor body with a cross cutting groove at the lower end and with internal thread at the upper end and a conical steel expanding plug pre-assembled and inserted the small end into the lower end of anchor body.
When to install, setting tool is used to hit the upper end of anchor body and cause steel plug get into and expand cut anchor body to generate the expansion force and fasten loose bolt, stud bolt or other external fasteners to realize anchoring and fixing the objects in the solid concrete, masonry or brickwork substrates.
Cut anchor bolt is made of carbon steel or stainless steel to mark double knurlings, half knurling or without knurling on anchor body surface alongwith the welding cut anchor Diameter 10 mm and 12 mm. The specified diameter of anchor is the outside diameter of the anchor body, the anchor length is the total length of body not including steel plug. Put cut anchor bolt into a pre-drilled hole in substrate with the open end having internal thread facing up, then insert a suitable setting tool and hit with a hammer until steel cut anchor bolt is entirely expanded.
Features:
▲ To assemble loose bolt-hex bolt,stud bolt or other external thread fasteners for installing.
▲ Cross cutting groove make steel plug expand anchor body easier and safer.
▲ Being suitable for medium-heavy duty loading purpose.
▲ Marked double knurlings,half knurling or without knurling on anchor body surface.
▲ Special welding cut anchor style is available.
Materials & Surface treatment:
☞ Carton steel & Zinc plating and Zinc plated and yellow passivated.
☞ Stainless steel 304/316
Base Materials: ☑ Concrete ☑ Masonry ☑ Brickwork ☑ Solid wall ☑ Stone
Applications:
ி Special door industry,Wall panel.
ி Installation of signboard, railings, shelves and gates.
ி Air conditioning and electrical installation engineering
ி Installation of grating and fence and heavy machinery installing.
ி Internal and external door installation engineering
ி Cable wiring engineering.
ி Structural expansion and rectification works.
Installation Instruction:
1]. Drill a hole in the base material to ensure the correct diameter and embedment depth.
2]. Use a nylon brush or high pressure air pump to remove all debris and dust.
3]. Insert cut anchor into the drilled hole to control correct embedment depth.
4]. Hit the opening end of anchor body by setting tool till being expanded completely.
5]. Pass the fastener through a guide hole in the fixture and vertically aligned with and close to a substrate hole.
6]. To tighten the fastener by tool until be fixed fully.
Product size description: (mm/inch)
| Item Code | Anchor Size | Anchor Length | Anchor Dia. | Thread Length |
| CUTAN06 | M6 (1/4) | 30 | 11 | 9 |
| CUTAN08 | M8 (5/16) | 35 | 12 | 12 |
| CUTAN10 | M10 (3/8) | 40 | 14 | 14 |
| CUTAN12 | M12 (1/2) | 52 | 17.5 | 20 |
| CUTAN16 | M16 (5/8) | 63 | 21.5 | 24 |
| CUTAN20 | M20 (3/4) | 83 | 25.5 | 31 |
Product size description for welding cut anchor: (mm)
| Item Code | Anchor Size | Anchor Length | Anchor Dia. |
| CWS-10 | 10 mm | 40 ~ 70 | 10 |
| CWS-12 | 12 mm | 40 ~ 70 | 12 |
**The carbon steel,stainless steel and welding cut anchors are available.
**The special size and style are available according to the samples and sketches supplied.
