General Description
PHFL Series High Flow Filter Cartridge is made of diameter 6"(152mm), single open end, without inner core, inside to outside flow direction. Filter body have two types: melt-blown and pleated. And pleated filter is divided into two forms: standard and crescent-shaped. End caps and filter layer using hot-melt welding, no bonding agent, with a wide range of chemical compatibility, can be applied to various fields.
Application:
General Purpose: RO Prefiltration, all kinds process water purification
Industrial: Process fluid, process water, condensed water, coolant, wastewater treatment;
Food and Beverage: Process water;
Petrochemical:Various solvents, chilled water, brine filtration
Power Plant: Supplementary water, condensation water, coolant
Product Features:
*Single cartridge could achieve flow rate 110m3/h
*Filtration systems are 50% smaller than typical size system
*Inside to outside flow direction keeps all of the contamination catched.
Performance Specifications
Dimensions(nominal)
OD | 6" (152mm) |
Length | 20"/40"/60" |
Material of Construction:
Model | Filter Media | Support/Drainage | End Caps | Seals Material |
PP
| Pleated Depth Polypropylene | Polypropylene | Glass Fiber Reinforced Polypropylene |
NBR,EPDM,Viton
|
Melt blown Polypropylene | Glass Fiber Reinforced Polypropylene | |||
GF | Glass Fiber/Polyester | Polyester | Glass Fiber Reinforced Polypropylene |
Filter Performance
Micron | 0.1μm, 0.5μm, 1μm, 5μm, 10μm, 15μm , 20μm, 40μm, 70μm |
Maximum operating temperature: | Pleated/melt-blown pp: 82℃ |
Pleated glass fiber: 121℃ | |
Maximum operating differential pressure (Inside to outside flow direction) | Pleated/melt-blown pp: 3.44bar@82℃ |
Pleated glass fiber: 3.44bar@121℃ | |
Suggestion pressure for filter replacement | 2.5Bar@20℃ |
Suggestion design flow | 40": ≤15m3/h |
60": ≤25m3/h |
