200L Solar Water heater
Working principle
The design of this type uses the all-glass evacuated solar collector tubes as the heat-absorb element. The high vacuum degree of the clearance between the outer and inner tube can reduce the heat emission which caused by convection and conduction to a very low level. All-glass evacuated tube transfers sun energy into heat energy by the high absorption rate and low emittance rate of layer films. Depend on the different density between the hot water and the cold water, a cycle can be created in the tube which hot water ascending and cold water descending status. Keeping natural circulation like this, the water in the tank will be heated.
Technical information:
| Non-pressurized Solar Water Heater TECH DATA | ||||||||
| WATER STORAGE TANKS | Material of out tank | High quality Painted steel, thickness 0.4mm | ||||||
| Material of inner tank | Food grade SUS304-2B stainless steel, thickness: 0.31mm | |||||||
| Tank size | 460/360mm | |||||||
| VACUUM TUBES | Structure | Single target or Three targets - magnetron sputtering plating | ||||||
| Sediment method | Cu/SS-ALN(H)/SS-ALN(L)/ALN | |||||||
| Tube size | 58*1800mm | |||||||
| BRACKET | Bracket material | Stronger galvanized steel | ||||||
| Bracket angle | 0,18,22,38,45 in option | |||||||
Feature:
1. the products use super heat condition pipe and has a good effect of heat exchange
2. the insulation layers use the up-to-date technology and has a good effect of temperature preservation which allows the water to stay warm for about 70 hours
3. Superior heat-preservation ensured by one-off molding polyurethane foam with thickness 50-60mm
4. stable and reliable performance, well wind resistance
5. meet the mankind healthy bath standard,the material of inner tank is SUS304-2B stainless steel plate, the silica gel ring sealing has a long life against the erosion and it do no harm to health
