Project solar heating system:
Description:
Solar Tank is split from solar collector,solar collector absorbs the sun energy and heating water in the tube of solar collector,and hot water rising to the tank for storge,the cold water goes down to solar collector for heat exchange.It always happens the way ,hot water up,cold water down for exchange heat.
Install instruction:
| Vacuum tube | Spec. (mm) | Φ 58× 1800 |
| Tube (pcs) | 60 | |
| Material | Borosilicate glass, magnetron spluttering selective coating | |
| Coating | Cu/SS-ALN(H)/SS-ALN(L)/ALN coating | |
| Water tank | Capacity | 600L for inner water tank |
| Inner tank | Food-grade stainless steel SUS304-2B | |
| Insulation | Imported polyurethane integrated foam-forming 50~60mm | |
| Tank shell | Color steel plate | |
| Bracket | Spec. (mm) | 1.2 ~ 1.5mm in thickness |
| Material | Hot-dip galvanized steel plate/Stainless steel plate /Aluminum alloy plate | |
| Accessories | Stainless bolts & nuts, Silicon rubber seal, Dust proof rubber seal, Plastic pipe holder | |
| Optional device | Electrical heater, Intelligent controller / Assistant tank, Anode magnesium bar | |
| Tilt angle | 25° ~ 50° | |
| Water output | 45-95 o C | |
| Hail resistance | Φ 25mm | |
Applications:
Hotel, house,commercial use,domesitc department.
Competitive Advantage:
1.Inner water tank: Food-grade stainless steel SUS304-2B as inner tank keeps the water clean and drinkable, together with advanced welding technics to ensure it with a long lifespan (15 years).
2.Water tank shell: Imported color steel plate, with its outer coating treatment ensures a long life even to ocean coast weather.
3.Insulation Layer: Germany-imported polyurethane integrated foam-forming with twice slaking treatment, preserves hot water constantly as long as 70~80 hours.
4.Supporting Bracket: Hot-DIP galvanized steel plate with a good weight bearing and wind resistance(140 km/hr), super mechanical performance and corrosion resistance ensures a long life to ocean coast, easy installation, universal bracket suitable for either flat or slope roof installation.
5. Accessories: Stainless bolts & nuts, water-proof silicon rubber, anti-aging dust-proof rubber seal, plastic pipe holder and ventilating cap to ensure their lives as long as other parts of the system
6. Advanced welding technology to prevent any leaking of tank
7. Special chemical layer between inner tank and outer tank to make sure the density of foam the same everywhere
8.Non-pressurized solar water heater is such kind of a most economical system with high efficiency at the same time. It works depending on the gravity of water, so it's much better to be installed on the slope or flat roof as top as possible to get enough hydraulic pressure.
9.A simple assistant tank can be equipped for tap water refill automatically or with an intelligent controller to control the start up of auxiliary heating device at the same time.
10.Vacuum tube: Hail-resisting borosilicate glass with high-tech selective coating ensures an efficient solar collecting, tri-target vacuum tube with its patent interference coating makes the efficiency not only improved by 12% but also with a high temperature resistance (380oC).
