Tracking Device battery pack 3.7V 3000mAh with PCM, LI-PO cell 805068, also for tester, shaver and security alart devices
Advantages:
1, High energy density
2, High working voltage for single battery cells
3, Pollution-free
4, Long cycle life
5, No memory effect
6, Capacity, resistance, Voltage, platform time consistency is good
7, With short-circuit production function, safe and reliable
8, Factory price& High quality
9, Good consistency, low self discharge
10, Light weight, small size
Safety Precaution
1. Do not throw battery into water or make it wet;
2. Keep the battery away from heat source(like fire or heater);
3. Do not throw the battery into fire or heat the battery;
4. Forbid to hammer to trample the battery;
5. Forbid disassembling the battery in anyway
Specification:
|
Name |
Deep cycle Lipo 3.7V 3000mah battery 805068 |
|
Model |
805068 |
|
Size |
Thickness × Width × Length (mm) |
|
8.5×51×70 |
|
|
Nominal voltage |
3.7V |
|
Nominal capacity |
5000mAh |
|
Max charge current |
1C |
|
Charging method |
charge with constant current 1C to 4.2V, then charge with constant voltage 3.0V till charge current is less than 0.01C |
|
Max discharge current |
1C |
|
Discharge cut-off voltage |
3.0 V, the over-discharge detection voltage of PCM |
|
Operating environment |
Charging, 0°C ~ 65°C ; 65±20%RH |
|
Discharging, -20°C~80°C ; 65±20%RH |
|
|
Storage environment |
-20°C~45° |
|
65±20%RH |
|
|
storage for a long time(>3 months) and the storage condition shall be:<35°C;65±20%RH;3.7~3.9V |
|
|
CycleLife(80%Prime Capacity) : |
>500times |
|
warranty |
Period of warranty: 12 months after sales |
|
Identification |
With protection board PCM for over charging, over discharging,short circut,over voltage. |
|
Using the charger designated by the manufacture. |
|
|
Don't throw the battery in fire or heat it. |
|
|
Don't short-circuit. |
|
|
Don't unpack the battery or change its structure. |
|
|
Pack design |
Battery pack should have sufficient strength and battery should be protected from mechanical shock |
|
No cell movement in the battery pack should be allowed. |
|
|
No Sharp edge components should be inside the pack containing the battery. |
|
|
Charging |
Charging current and charging voltage should be less than specified in the Product Specification. |
|
The charger shall be designed to comply with Product Specification. |
|
|
It is dangerous that charging with higher curren or voltage than Product Specification may cause damage to the cell electrical,mechanical safety performance. |
Main Application:
