Xpol 698~960MHz Grey Fiberglass Base Station Antenna 400 Input Power
Our Advantages:
- Quality Control: ISO:9001:2008
- MOQ: 1pc
- Delivery: within 21 work days
- Good After-sales Service: Engineer Oversea Available
- One Year Free Warranty
- OEM/ODM Service Welcomed.
Electrical Specifications
| Frequency Range (MHz) | 698~824 | 824~960 |
| Polarization | ±45° | |
| Electrical Downtilt (°) | 0~10 | 0~10 |
| Gain (dBi) | 15.5 | 16 |
| Half-power Beam Width (°) |
Hor:68 Ver:10 |
Hor:63 Ver:9 |
|
Sidelobe Suppression (dB) (First Sidelobe Above main Beam) |
0º...5º...10º 15...15...14 |
|
| Isolation (dB) | Typically:≥28 | |
| Cross-polar Ratio (dB) | ≥15(±60°≥10) | |
| Front-to-back Ratio (dB) | Typically:≥25 | |
| VSWR | ≤1.5 | |
| Impedance (Ω) | 50 | |
|
Intermodulation IM3 (2×43dBm carrier) |
≤-150 dBc | |
| Lightning Protection | DC Ground | |
| Maximum Input Power (W) | 400 | |
Mechanical Specifications
| Connector Position | Bottom |
| Connector | 2×7/16DIN-Female |
| Height×Width×Depth (mm) | 2080×300×146 |
| Packing Size (mm) | 2410×400×280 |
| Antenna Weight (kg)Installation Kit Weight (kg) | 4.3 |
| Antenna Weight (kg) | 18 |
| Packing Weight (kg) | 28 |
| Max. Wind Velocity (m/s) | 60 |
| Wind Loading Area (m²) | 600.62 |
| Reflector Material | Aluminum Alloy |
| Radome Material | Fiberglass |
| Mechanical Tilt (°) | 0~10 |
| Radome Color | 0~10Gray |
| Operating Temperature (°C) | -50~65 |
| Mounting Hardware (mm) | φ50~φ115 |
Installation Tips:
The antenna upper and lower end sawtooth clamp code of the nut, spring washer and flat
gasket unscrew, take out sawtooth clamp code outside, and the antenna has a connector
at the bottom with sawtooth clamp code in outer diameter as φ35~ φ75mm on the pole,
next take out of sawtooth clamp code through M8 screw, put on flat gasket, spring washer,
then tighten the nut.
FAQ
Q1: How long do I need to wait before my goods arrive?
A: 5-7 days for air transportation, 3-5 days for international express.
Q2: What is your warranty?
A: Our warranty is 12 months after delivery, Hi-Young pays high attention to after-sales service.
Q3: What is the Minimum Order Quantity(MOQ)?
A: Normally, MOQ is 5pcs, but special requirements can be accepted.
Q4: How much do I need to pay for your OEM service?
A: No need to pay extra cost for our OEM service if order quantity over 50pcs. The OEM cost includes in the unit price.
Q5: How is your product quality?
A: Our raw materials are purchased from qualified suppliers. And we have a strong quality control team to guarantee our quality according to AQL standard. Renhotec always care what you care!
Radiation Pattern
Model
