50-160mm PVC Pipe Extrusion Line
BENK's PVC Pipe Extrusion Line With its wide range including various technical solutions, BENK'S production does not only include standard machines, but also offers complete pipes extrusion lines, tailor-made according to the customers' requirements, still assuring high performances and competitive prices. The lines can produce pipes in thermoplastic materials, with diameters starting from 16 mm up to 800 mm.
PVC Pipe Extrusion Line techical paramaters:
| PVC Pipe Extrusion Line | |||||||
| MODEL NO. | KPM63 | KPM160 | KPM250 | KPM315 | KPM450 | KPM630 | KPM800 |
| PRODUCTION RANGE (MM) | 16-63 | 20-160 | 75-250 | 110-315 | 110-450 | 315-630 | 400-800 |
| EXTRUDING CAPACITY (KGS/H) | 120-220 | 150-250 | 200-330 | 280-350 | 400-500 | 600-700 | 800-1000 |
| SCREW DIAMETER (MM) | 65/132 | 65/132 | 80/156 | 80/156 | 92/188 | 92/188 | 110/220 |
| DRIVING MOTOR AC+VF | 30 KW | 37 KW | 55 KW | 110 KW | 110 KW | 132 KW | 172 KW |
| HEATER CAPACITY | 18.5KW | 20KW | 40KW | 49KW | 60KW | 60KW | 84KW |
| TEMPERATURE CONTROL (POINTS) | 4 | 5 | 5 | 7 | 7 | 8 | 7 |
| COOLING SYSTEM | VACUUM PUMP 4-7.5KW / WATER COOLING SYSTEM / STAINLESS STEEL | ||||||
| HAUL-OFF UNIT | CATERPILLAR 2 TRACKS | 4 TRACKS | 6 TRACKS | 8 TRACKS | |||
| DRIVING MOTOR AC+VF | 3KW | 3KW | 4KW | 4KW | |||
| CUTTING UNIT | COMMON CUTTING | PLANETARY CUTTING | |||||
| DRIVING MOTOR | 1.5KW | 4KW | 4KW | 5KW | |||
| STACKING UNIT | AIR CYCLINDER SYSTEM | ||||||
| WEIGHT (TONS) | 7-8 | 7-8 | 9-10 | 10-11 | 12-14 | 14-16 | 20-22 |
| USED FLOOR SPACE L*W*H (M) | 25*2.6*3.0 | 28*3.0*3.2 | 36*3.5*3.2 | 40*3.5*3.2 | 42*3.5*3.2 | 45*3.5*3.5 | 60*4.0*3.5 |
PVC Pipe Extrusion Line each part introduction:
1. Extruder for PVC Pipe Extrusion Line
BENK offers customers a wide range of single and twin screw extruders, with parallel or conical screws. All BNEK's extruders have different lengths and drive motors to assure a proper plasticizing and output; moreover they are synchronized with the various components of the line.
2. Extrusion Die for PVC Pipe Extrusion Line
BENK studies, designs and manufactures extrusion and co-extrusion heads and dies to be assembled on its own latest generation extruders.
The extrusion heads play a decisive role in the production of extruded pipes: thickness uniformity, regular aspect of the inner and outer surface, excellent positioning and very low relevance of the welding lines, absence of residual tensions; all parameters required for a good quality pipe.
3. Vacuum calibrator for PVC Pipe Extrusion Line
BENK supplies lines complete with vacuum calibration troughs, single and double stage, as well as cooling troughs for the production of pipes in the various plastics and with diameters up to 1200 mm. The control of vacuum and water temperature is essential to produce the diameters and thicknesses required by the regulations in force, for such reason, KC installs, on its calibration troughs, manual or automatic devices for the vacuum control, together with filters and regulators for water flow and temperature.
All troughs are built in stainless steel and the used components assure a long operation life, without any expensive maintenance requirements.
4. Haul-off for PVC Pipe Extrusion Line
BENK supply many models for pipe extrusion line, according to pipe OD, using different model, this 50-160mm PVC Pipe Extrusion Machine Line use 3-claws haul-off.
5. Cutter for PVC Pipe Extrusion Line
BENK supply a large range planetary cutter for pipe from OD 50mm to 800mm.
If you interest in our PVC Pipe Extrusion Machine, Please feel free contact us.
Thanks!
