I. Overview:
YG032D Fabric bursting strength tester is used to determine the bursting strength of a variety of textile fabrics.
IV. Related test standards:
ISO 13938.1,ASTM D3786,BS 4768,FZ/T 60019,FZ/T 01030,WOOLMARK TM 29,WSP 30.1,JIS L 1018.6.17, GB/T 7742.1-2005 Textiles - Bursting properties of textiles - Part 1: Bursting strength of textiles - Textiles - Textiles - And determination of bursting dilatancy - Hydraulic method.
II. Test principle:
A sample of a certain area is covered on the elastic membrane and sandwiched by a ring clamp of a prescribed size. The pressure of the fluid is gently increased under the elastic membrane so that the specimen breaks within a certain time range, and the maximum Fluid pressure value, minus the elastic diaphragm correction is the test sample burst strength value.
III. Main technical parameters:
1. Upper pressure ring diameter: Ф30.5 ± 0.05mm
2. Under the pressure ring diameter: Ф31.5 ± 0.05mm
3. Elastic membrane size: diameter Ф80mm, thickness 0.9 ± 0.1mm
4. Upper and lower clamping ring clamping force:> 690kPa
5. Low pressure gauge measuring range: 0 ~ 1.6MPa minimum scale value of 0.02MPa
6. High pressure gauge measuring range: 0 ~ 6.0MPa minimum division value 0.05MPa
7. Expansion degree of expansion plate indexing value: 0.05mm per cell
8. Motor: 110SZ52 1500r / min 185W
9. Power supply: Ac220V 50Hz
10. Speed range: 100 ~ 1200r / min
11. Instrument weight: 95Kg
12. Overall dimensions: (length × width × height) 650 × 370 × 650mm
