1.Description
This part was made in 99% MGO high purity MGO material. It was yellow special holes MGO tube part, which was designed per customer request. The wire will pass through the two ends holes. Color was yellow. The length was about 6cm
Magnesium oxide tubes(insulator)
Where they were used ? They can be used in cartridge heats, Tubular heaters, Thermocouple, Cable, and other speical electric heaters and so on. They were exported in Europe very well with good quality and competitive prices.
Standard some typcial mgo tubes prices:
specification | Price in dollar | specification | price in dollar | specification | price in dollar |
OD*length (mm) | OD*length(mm) | OD*length (mm) | |||
￠3*200 | $0.18 | ￠3*250 | $0.232 | ￠3*300 | $0.343 |
￠4*200 | $0.19 | ￠4*250 | $0.254 | ￠4*300 | $0.3 |
￠5*200 | $0.19 | ￠5*250 | $0.254 | ￠5*300 | $0.3 |
￠6*200 | $0.204 | ￠6*250 | $0.275 | ￠6*300 | $0.326 |
￠7*200 | $0.238 | ￠7*250 | $0.317 | ￠7*300 | $0.377 |
￠8*200 | $0.275 | ￠8*250 | $0.36 | ￠8*300 | $0.429 |
￠9*200 | $0.326 | ￠9*250 | $0.425 | ￠9*300 | $0.506 |
￠10*200 | $0.412 | ￠10*250 | $0.532 | ￠10*300 | $0.634 |
￠11*200 | $0.498 | ￠11*250 | $0.639 | ￠11*300 | $0.763 |
￠12*200 | $0.549 | ￠12*250 | $0.703 | ￠12*300 | $0.84 |
￠13*200 | $0.618 | ￠13*250 | $0.789 | ￠13*300 | $0.943 |
￠14*200 | $0.737 | ￠14*250 | $0.939 | ￠14*300 | $1.123 |
￠15*200 | $0.823 | ￠15*250 | $1.036 | ￠15*300 | $1.239 |
￠16*200 | $0.977 | ￠16*250 | $1.17 | ￠16*300 | $1.483 |
￠17*200 | $1.13 | ￠17*250 | $1.418 | ￠17*300 | $1.699 |
￠18*200 | $1.33 | ￠18*250 | $1.673 | ￠18*300 | $2.02 |
The above prices were only for your reference. The detail quotation will be made per your detail requests and quantity.
2. Physical performance
This part had very good phyisical performance in resistance high temperature, insulation, thermal conductivity and heating. They were used widely in high rate of working electric appliance, high temperature equipment field. The heating agent was water and oil. THey were components that assembled and used in special use hot runner and thermocouple
3. Process
We can make the precise extrusion mould per customer drawing dimension request. And choose the correct Mgo material formual to meet customer actual request. Using automatic machine to form and advanced kiln firing the half-finished part with accurate and stable temperature to gurantee the parts good quality. Then, cutting the parts with correct length request by customer. The part will be very straigt . We will check the dimensions to decide whether some distortion in the holes on the parts both sides and arrange 100% inspection for appearance of the tubes before shipment.
4. Service
We can adjust the temperature to let the part have the correct hardness per customer assembly request. It will be convenient to assembly with the wires. We will pack them very tightly mabye 20pcs together to form one bale and pack them with soft plastic material bag into carton to protect the part to avoid damage during shipment to customer. All the parts dimension will surely meet customer tolerance request. If you had any request, we can help you design the part per your actual using condition.
5. Capacity
Each month 30,000pcs
6. Quality and shipment
We will inspect all our parts before shipment to gurantee the dimension was OK and the appearance without any defects.
Our quality system was ISO 9001. We will always supply customer ontime shipment service.
7. Quality feedback
If you found out any defects in the shipment, we will send you the addtional quantity to you soon as we can. And i will give
you the 8D report to find the root cause to avoid this next time.
8. Payment
We can accept TT. And if you have concerning, we can have discussion
9. Customer service
We can design the parts per customer request and parts working conditions. We also can make the parts per customer
drawings request.
10. Advantage
We were not trading company. We were professional manufacturer. We can control the whole process from
material to finished parts and shipment and business process. We can export the parts ourselfves and can
save so much cost and keep the prices competitive.
11. The tubes will be assembled with metal tube. If too hard, it will break during operation. So we must desing
the correct and reasonable hardness for the tubes. Then, it can be assembled with metal tubes well and work
well. Our company had the ability to desing the correct formual and adjust the correct temperature to gurantee
the correct tube hardness.
