Plastic Water Dispenser Reverse Osmosis Parts Drinking Water Filter Taps Push Handle
1 . For water dispenser
2 . Material : Plastic , ABS , AS , PP
3 . Heat resistant : 100 centigrade
4 . Weight : 25.6 grms/pc
5 . Children lock safety design : accoding to clients' requirement
6 . Inner or outer screw
7 . Male thread
8 . Strong push handle
9 . Precision design size for all water dispenser
10 .Type : outer thread tap
Installation :
External threads need to open the machine backplane , and the hose connected to the faucet to remove the nuts in the whole spin down , and then install the new faucet , and then tighten the nut , then a good hose tie tie .
The company specializing in the production of drinking fountains leading , more models of good quality , welcome to our customers advice .
1 . Tap the use of new materials from the production and processing , the full use of materials ;
2 . All the faucets are food grade materials ;
3 . The company has dozens of injection molding machine equipment , delivery time can be guaranteed ;
4 . Each faucet has a professional test master carefully measured water , the quality is 100% ;
Water purifier installation
1 . Turn off the water, turn on the faucet , and let go of the remaining water .
2 . Remove the faucet inlet pipe , install the water inlet tee and tighten it with a wrench . (When the water inlet tee is installed , if there is a rubber gasket on the joint , the raw material belt is not needed . ) The water inlet pipe is mounted on the water inlet tee and tightened with a wrench .
3 . Close the inlet ball valve , open the water , wipe with a paper towel to check whether the installation of water seepage joints .
4 . The PP cotton , granular activated carbon , compressed activated carbon filter in the order of three filters into the bottle , and wrench tighten all levels of filter bottle screw cap .
5 . In the pressure barrel exports wrapped around the amount of raw material belt , fitted with pressure drum ball valve , PE pipe with post-activated carbon inlet and the pressure tank outlet valve connected .
6 . Water pipe connection : kitchen type water machine machine installation , the inlet valve directly to the pipeline access to the first stage of the machine bucket water inlet ; cabinet machine installation , first open the lower part of the cabinet Pipe and wire inlet and outlet of the hole cover . The power cord leads and the water ball valve at the end of the tube through the hole , lead to the cabinet and received the first stage of the machine bucket water inlet joints , and then check whether the joints seepage .
7 . Flush pre-filter: first remove the reverse osmosis membrane shell into the water short PT tube , insert a container , open the water and power, flush the first three filters , directly to the water clear .
Our Company specialized in Water Dispenser Parts . If you have inquiries , please feel free to contact us . We will provide the information as you want . Different size , material , structure and style are available .
