MODEL NO.:
DW260A Liquid Moisture Management Tester
APPLICATION:
Liquid Moisture Management Tester in multi-dimensions, called liquid moisture management properties, influence the comfort of consumer's clothing significantly, especially in sportswear.
DW260A Moisture Management Tester (MMTESTER) is developed to measure the liquid moisture management properties of knitted and woven fabrics.
RELATED STANDARDs:
STANDARDS | AATCC 195 | GB/T 21655.2 |
Note: this Liquid Moisture Management Tester can conform to but not limit to the standards above, for more standards conformance, please contact us.
TEST PRINCIPLE:
The Moisture Management Tester
consists of upper and lower concentric moisture sensors. The specimen is held flat under fixed pressure between the sensors while standard test solution is introduced on to the top surface of the specimen. Electrical resistance changes between the upper and lower sensors are then recorded dynamically on computer.
The MMTESTER permits the measurement of the following indexes:
1 Wetting Time Top/Bottom (WTT/WTB)
2 Absorption Rate Top/Bottom (TAR/BAR)
3 Maximum Wetted Radius Top/Bottom (MWRT/MWRB)
4 Spreading Speed Top/Bottom (TSS/BSS)
5 Accumulative One-Way Transport Capacity (R)
6 Overall Moisture Management Capacity (OMMC)
Graphical display of moisture spreading process
Evaluation result of moisture management properties
Featrues :
1 Automatic control system starts testing, stopping and calculating all the indexes;
2 Built-in pressure measuring device ensures exact pressure loaded on the tested specimen;
3 Steady pumping system, volume of liquid can be adjusted by the software;
4 Reverse pumping function prevents brine crystallization from plugging the pipeline;
5 WiFi connection with computer makes data transmission more stable.
KEY SPECIFICATION:
1 Interface | WiFi |
2 Operation temp & RH | 18°C to 40°C, 20% to 80% (non-condensing) |
3 Pump on time | 20sec |
4 Test solution quantity | 0.2g±0.01g (Fine adjustment by user is allowed) |
5 Test solution conductivity | 16mS±0.2mS |
6 Test pressure | 960grams |
7 Power supply | 110V~230V 50Hz/60Hz 0.5 A |
8 Dimensions | 200mm(Width)×360mm(Depth)×250mm(Height) |
9 Net weight | 12kg |
STANDARD CONFIGURATION:
No. | Item | Quantity |
1 | Main machine | 1set |
2 | MMTESTER analysis software. | 1set |
3 | Conductivity meter | 1set |
