Feature points:
1. Good cutting effect with high precision linear and margin smooth.
2. High quality tungsten carbide as taw material, higher hardness,
Longer life(over 2500m).
3. Using easier and 'greener'. No need electricity and water, no noise, no dust.
4. Available for customized size.
| Detail of Size(mm) | |||||||
| Type | Tolerance (OD) | OD | Tolerance (ID) | ID | Tolerance (T) | Thickness | Angle(°) |
| Φ22×Φ14×5.0 | ±0.05 | 22 | +0.01~+0.08 | 14 | 0~-0.05 | 5 | 90/100/110/120 |
| Φ22×Φ14×2.6 | 22 | 14 | 2.6 | ||||
| Φ22×Φ14×2.0 | 22 | 14 | 2 | ||||
| Φ22×Φ13×2.0 | 22 | 13 | 2 | ||||
| Φ22×Φ12×2.2 | 22 | 12 | 2.2 | ||||
| Φ22×Φ10.5×2.0 | 22 | 10.5 | 2 | ||||
| Φ22×Φ6×4.6 | 22 | 6 | 4.6 | ||||
| Φ22×Φ6×2.0 | 22 | 6 | 2 | ||||
| Φ18×Φ6×3.0 | 18 | 6 | 3 | ||||
| Φ18×Φ6×3.8 | 18 | 6 | 3.8 | ||||
| Φ16×Φ6×4.9 | 16 | 6 | 4.9 | ||||
| Φ16×Φ6×3.0 | 16 | 6 | 3 | ||||
| Φ16×Φ6×2.0 | 16 | 6 | 2 | ||||
| Φ16×Φ6×1.5 | 16 | 6 | 1.5 | ||||
| Φ16×Φ4×3.0 | 16 | 4 | 3 | ||||
| Φ15×Φ6×2.9 | 15 | 6 | 2.9 | ||||
| Φ15×Φ6×2.0 | 15 | 6 | 2 | ||||
| Φ15×Φ6×1.5 | 15 | 6 | 1.5 | ||||
| Φ14×Φ6×1.5 | 14 | 6 | 1.5 | ||||
| Φ13.5×Φ6×2.0 | 13.5 | 6 | 2 | ||||
| Φ13.5×Φ6×1.5 | 13.5 | 6 | 1.5 | ||||
| Φ13.5×Φ6×1.0 | 13.5 | 6 | 1 | ||||
| Φ12×Φ3×3.0 | 12 | 3 | 3 | ||||
| Φ10×Φ4×3.0 | 10 | 4 | 3 | ||||
| Φ9×Φ2×2.0 | 9 | 2 | 2 | ||||
| Φ8×Φ1.5×1.1 | 8 | 1.5 | 1.1 | ||||
| Φ7×Φ1.9×1.2 | 7 | 1.9 | 1.2 | ||||
| Φ6.4×Φ1.5×1.3 | 6.4 | 1.5 | 1.3 | ||||
| Φ3.5×Φ1×1 | 3.3 | 1 | 1 | ||||
| Φ3.3×Φ1×1 | 3.5 | 1 | 1 | ||||
