CT600 Ladder Type Perforated Cable Tray Roll Forming Machine, Cable Tray Production Line
Cable Tray Work Piece Drawing
Main Specifications
1). 7 Ton Hydraulic Uncoiler
Machine frame: welding structure with shot lastingtreatment
Description: Put the coil to the mandrel, the hydraulic cylinder will tighten the coil.
Start the machine, the motor will drive the mandrel at first, then the steel sheet will be released to the leveling
Electric releasing coil, hydraulic expanding, tension
Weight capacity: 7 Ton
I.D: 508mm
Motor Power: 5.5KW
Hydraulic System Power: 4KW
2). 7 Roller Leveling Machine
2 Rollers pinch feeding, 7 rollers leveling
leveling roller diameter: about Φ 90mm
Leveling roller material: high grade 40Cr
Heat treatment of leveling roller: surface Hi-frequency quench treatment
Leveling motor power: 4KW
3). Servo Feeding Machine
Servo motor power: 3KW
Servo motor brand: YASKAWA (JAPAN)
To exact accurately feed the sheet into punching machine according to the set program
4). Hydraulic Pre-Punching Machine
Punching Die: Cr12 Mov, quenching process
Punching Die size: according to drawing
Punching Power: 15KW
Punching controlled by PLC
5). Main Cable Tray Roll Forming Machine
Forming material thickness: 1.5-2.5mm
Forming material type: GI or Carbon Steel
Machine Frame: high grade steel welded and tempering treatment
Shaft Material: 40Cr high grade Steel tempering treatment (HB220-260)
Shaft Diameter: Φ 65mm
Bearing: HRB bearing ( Top Chinese brand )
Roller Material: high grade GCr15 steel, and roller surface with hard chrome ≥ 0.05mm
Forming Station: ≈ 18 stations
Forming Speed: 0-15m/min excluding punching / cutting time
Forming Motor: ≈15KW
Width adjustable motor ≈1.5KW
Size adjustment: electrical power adjustment
Drive type: Chain Drive
6). Hydraulic Cutting & Hydraulic Station
Cutting type: Hydraulic Post-cutting after roll forming,
When Cutting, Machine stop
Cutting blade material: Cr12Mov, Quench treatment, HRC58-62
Hydraulic Station Power: 15KW
7). PLC Control System
The entire line is controlled by imported PLC, LCD touch screen human-machine interface. People interact with the PLC. Operator by setting the program to run automatically (programmable control) to monitor and control process, to achieve the operator to control the production line and modify the control parameters, and real-time monitoring of equipment status, operating parameters and fault indication. Work piece length digital setting, work piece length adjustable. Real-time monitoring of equipment operating status and fault indication.
Operation: manual / automatic. It is convenient to maintenance with the manual model and there are emergency stop bottom on it.
8). Run-out Table
Form: Steel welding structure, no-power exit rack
Quantity:1 piece
