.jpg)
Axial Piston Variable Motor AA6VM (A6VM)
Open and closed circuits
Sizes ----Nominal pressure/Peak pressure
28-200 ----5800 ps (400 bar) / 6500 psi (450 bar)
250-1000 ----5100 psi (350 bar) / 5800 psi (400 bar
Open and closed circuits
Sizes ----Nominal pressure/Peak pressure
28-200 ----5800 ps (400 bar) / 6500 psi (450 bar)
250-1000 ----5100 psi (350 bar) / 5800 psi (400 bar
Features:
1) Variable motor with axial tapered piston rotary group of bent axis design, for hydrostatic drives in open and closed circuits
2) For use in mobile and stationary application areas
3) The wide control range enables the variable motor to satisfy the requirement for high speed and high torque.
4) The displacement is infi nitely variable from Vg max to Vg min = 0.
5) The output speed is dependent on the fl ow of the pump and the displacement of the motor.
6) The output torque increases with the pressure differential between the high and low pressure sides and with increasing displacement.
7) Wide control range with hydrostatic transmission
8) Wide selection of control devices
9) Cost savings through elimination of gear shifts and possibility of using smaller pumps
10) Compact, robust bearing system with long service life
11) High power density
12) Good starting characteristics
13) Low moment of inertia
1) Variable motor with axial tapered piston rotary group of bent axis design, for hydrostatic drives in open and closed circuits
2) For use in mobile and stationary application areas
3) The wide control range enables the variable motor to satisfy the requirement for high speed and high torque.
4) The displacement is infi nitely variable from Vg max to Vg min = 0.
5) The output speed is dependent on the fl ow of the pump and the displacement of the motor.
6) The output torque increases with the pressure differential between the high and low pressure sides and with increasing displacement.
7) Wide control range with hydrostatic transmission
8) Wide selection of control devices
9) Cost savings through elimination of gear shifts and possibility of using smaller pumps
10) Compact, robust bearing system with long service life
11) High power density
12) Good starting characteristics
13) Low moment of inertia
.jpg)
